I have merged in my changes with "red/orange/green" channels and updated the brahvo executable in the operator account. K.O. On Tue, Aug 29, 2000 at 10:53:46PM +0200, Claus O. E. Jorgensen wrote: > > A new version of BRAHVO (BRAHMS High VOltage control system) has > now been committed to the CVS and installed on the operators account. I > should now be possible control all types of detectors and mainframes > (which means that it's not necessary to use the vt100-like control > programs for the L1458A and L1458B mainframes). Here is a few comments > on how it looks. > > Included detectors: > H1, C1, H2, TOFW, BBR, BBL, TILES, Si, T1, T2, MTPC1, MTPC2, T3. > > Channel Mapping: > Information on channel mapping has been found in the shift report, and > I'm not 100% confident that it's correct (the shift report is not > consistent). If you want to be sure that the channel mapping is correct > for a given detector, please check the setting file in the > /opus/home/operator/HV/config/. > > New stuff: > Control window for the TPC's, the Si and T3. If you press the Label > button (to the left) for a channel a control window will appear, here you > can change voltage, ramp speed, trip limit, etc. You can also > enable/disable a channel by pressing the check button next to the label > button (this feature is only available for channel connected to a Lecroy > 1458 mainframe) - this corresponds to the ] and the [ commands on the old > L1458 control windows. > > Users manual: > Is on its way. > > > Please don't hesitate to contact me if you have any questions, comments or > suggestion. > > Thanks, > > Claus Ekman Jorgensen > > Phone : (+45) 33 32 49 49 > Office : (+45) 35 32 53 05 > E-mail : ekman@nbi.dk > -- Konstantin Olchanski Physics Department, Brookhaven National Laboratory, Long Island, New York olchansk@bnl.gov
This archive was generated by hypermail 2b29 : Tue Aug 29 2000 - 20:58:47 EDT