geometry values committed and corrected

From: Kris Hagel (hagel@comp.tamu.edu)
Date: Wed Apr 09 2003 - 11:19:37 EDT

  • Next message: Ramiro Debbe: "Proceedings to workshop" 
    Hello,
This is to let you know (again) that geometry values for run-III have 
been committed to the DB.  They are the survey numbers (converted to 
local coordinates for the DB) and thus will need "fine" tuning.

One thing that turned up while we were debugging this is that the y 
position of t1 and t2 is apparently set incorrectly for run-II (ie last 
years run).  They were known to be .8 (and are set that way for the 
run-III period), but were 1.3 for t1 and .9 for t2.  They have not been 
changed for run-II because that would affect matching and projections 
etc and should be discussed before this would be done if it would be 
done.  It might clear up several mysteries (along with the possibility 
of generating new mysteries???).  Again, the y-values for run-III for t1 
and t2 are set to the "correct" values, ie both = 0.8

Regards

Kris

    This archive was generated by hypermail 2.1.5 : Wed Apr 09 2003 - 11:20:16 EDT