George Stephans	22-Oct-1998

Counting House Racks and Clean Power

Numbers refer to drawing of electronics room rack layout.  Racks are numbered from left to right, 
looking into the room from the counting house.  Locations of outlets are indicated by dividing 
racks into 4 vertical sections labeled bottom, lower-mid, upper-mid, and top

Rack 1 	High Voltage
	208V	20Amp	1-phase	1 outlet	bottom	          3-prong twist-lock
	208V	20Amp	1-phase	1 outlet	lower-mid	  3-prong twist-lock
	115V	20Amp		6 outlets	left side top	  6 outlet power strip
	115V	20Amp		6 outlets	right side top	  6 outlet power strip

Rack 2	DAQ
	115V	20Amp		4 outlets	left side top	  4 outlet power strip
	115V	20Amp		4 outlets	left side bottom  4 outlet power strip
	115V	20Amp		4 outlets	right side top	  4 outlet power strip
	115V	20Amp		4 outlets	right side bottom 4 outlet power strip

Rack 3	TOF Fastbus
	208V	25Amp	3-phase	1 outlet	top	          Hart-Lock NEMA L21-20
	208V	25Amp	3-phase	1 outlet	lower-mid	  Hart-Lock NEMA L21-20
	115V	20Amp		4 outlets	left upper-mid	  4 outlet power strip
	115V	20Amp		4 outlets	right bottom	  4 outlet power strip

Rack 4	Trigger
	115V	20Amp		4 outlets	left side top	  4 outlet power strip
	115V	20Amp		4 outlets	left side bottom  4 outlet power strip
	115V	20Amp		4 outlets	right side top	  4 outlet power strip
	115V	20Amp		4 outlets	right side bottom 4 outlet power strip

Rack 5	Future Upgrades
	115V	20Amp		4 outlets	left side top	  4 outlet power strip
	115V	20Amp		4 outlets	left side bottom  4 outlet power strip
	115V	20Amp		4 outlets	right side top	  4 outlet power strip
	115V	20Amp		4 outlets	right side bottom 4 outlet power strip

Rack 6	RHIC
	115V	20Amp		Power strip on left side of rack
	115V	20Amp		Power strip on right side of rack

Total Circuits:
	208V	20Amp	1-phase	 2
	208V	25Amp	3-phase	 2
	115V	20Amp		18