Notes about USP-II-i-1V/3-1024-440 X7 P2 

S36003574
Ethernet 00 80 b6 04 8c 82
Host ID 80003574

8:34 AM 10/12/00

#########1#########2#########3#########4#########5#########6#########7########
# probe-scsi-all does not show devices connected to the the port SCSI A 

ok probe-scsi-all
/pci@1f,0/pci@1,1/scsi@2,1

/pci@1f,0/pci@1,1/scsi@2

# it hangs here

#########1#########2#########3#########4#########5#########6#########7########
# Testing configuration: SCSI A - empty, SCSI B - disk array

ok test scsi
No targets found

scsi selftest failed. Return code = -1
#
Executing last command: probe-scsi-all
/pci@1f,0/pci@1,1/scsi@2,1
Target 0
  Unit 0   Disk     SEAGATE ST34573WC       6244

/pci@1f,0/pci@1,1/scsi@2

#
#########1#########2#########3#########4#########5#########6#########7########
ok test net
Hme register test --- succeeded.
Internal loopback test -- Cannot reset transceiver!
Dumping All PHY Registers
0 : ffff
1 : ffff
...
#
#########1#########2#########3#########4#########5#########6#########7########
cdromb                   /pci@1f,0/pci@1,1/scsi@2,1/disk@6,0:f

#########1#########2#########3#########4#########5#########6#########7########
5:27 PM 4/4/01
Testing Buffer box with 8 73 GB disks

For LUNs>0 to be seen on solaris one must edit /kernel/sd/sd.conf adding 
entries for these LUNs

Configuration: 7 logical disks mappin physical disks, NRAID type, all connected
to ch0 id0.
Average block writing rate is 30 MB/s with 50% CPU usage.