| Instructions |
Measurements |
Comments |
Actions To Take |
| TOF Discriminators |
| Go to the Camac controls VI. |
Is X and Q valid? |
Yes c No c |
If no, read out crates and recheck. If still
invalid, note in logbook and restart. |
| Diagnostic Run Mode Checks |
| Go to the 4-fold logic unit in the TOF NIM bin.
Look at the UPPER unit only. |
Are channels A,B,C and D Off? (Upper part.) |
Yes c No c |
If no, insert pin into pinholes A, B, C, and D
if one isn't present. |
| The LED HV is located above the HV mainframe. |
Is LED HV Off? |
Yes c No c |
If No, dail down, counter clock
wise, the HV to zero and disable HV. |
| Look at the Time Calibrator in the TOF NIM Bin. |
Is Time Calibrator Off? |
Yes c No c |
If No, switch off. |