1. FEC Power Supplies |
||||
1.1 |
Nominal state | Actual State | Agree? | |
| On c Off c | On c Off c | Yes c No c | If they do not agree , write in logbook, call Si expert.If all FEC Power Supplies are off, jump to section 2. | |
1.2 |
If there are FEC Power Supplies ON: | |||
| - Are all corresponding indicators in Si Monitor green? | ||||
| Yes c No c | If not, go to next step. If yes, jump to section 2. | |||
| - Do the NOT OK red indicators correspond to voltages? | ||||
| Yes c No c | If yes, go to manual for appropriate action. | |||
| - Do the NOT OK red indicators correspond to fans? | ||||
| Yes c No c | If yes, go to manual for appropriate action. | |||
| - Do the NOT OK red indicators correspond to currents? | ||||
| Yes c No c | Check the history graph. If the current is increasing very rapidly, call expert. Otherwise, make note in logbook. | |||
2. Bias Power Supplies |
||||
2.1 |
Nominal state | Actual State | Agree? | |
| On c Off c | On c Off c | Yes c No c | If not, write in logbook, call Si expert. If yes, jump to 3. | |
2.2 |
If there are Bias Power Supplies ON: | |||
| -Are all corresponding indicators in Si Monitor green? | ||||
| Yes c No c | If not, write in logbook, call Si expert. | |||
3. Cooling System |
||||
3.1 |
Nominal state | Actual State | Agree? | |
| On c Off c | On c Off c | Yes c No c | If not, write in logbook, call Si expert or Robert. If yes, jump to 4. | |
3.2 |
If the Cooling System is ON: | |||
| -Are all corresponding indicators in Si Monitor green? | ||||
| Yes c No c | If not, go to next step. If yes, jump to 4. | |||
| - Is there one red flow indicator any of the subsystems? | ||||
| Yes c No c | Write in the logbook which indicator is red. | |||
| - Are there any other red indicators? | ||||
| Yes c No c | If yes, report in logbook, call Robert. If not, go to 4. | |||
4. UPSs |
|
4.1 |
Check UPS
Status, from the Portal. Compare to normal UPS
status. Check that "Output Status" is Online, and "Battery Capacity" is ~100%. |
5. Alarms |
||
5.1 |
Is Alarms.vi running? | |
| Yes c No c | If not, double-click the alarms.vi icon on the desktop. | |
5.2 |
Can you hear the alarm after pressing the test button? | |
| Yes c No c | If not, try adjusting the volume on the speakers. | |