| Instructions | State | Actions To Take |
| Check for flashing yellow lights on top of the Fastbus crate | flashing or constantly shining | Yes: You are done with the check for this subsytem No: Continue checklist |
| Enter rc_status() in runcontrol and check the 'Run state' | 'stopped' | Start run using rc_start(RUN_ALLBEAM+WRITING) if beam is on or rc_start(RUN_SIPED,999999) if beam is off. |
| 'started' | Try to stop the run using rc_stop_run() you should see response in all ROC windows and in the phatdaq, start run with rc_start(RUN_SIPED,999999) command the Fastbus yellow lights should light up. If not - call expert. |