boot device          : dc
processor number     : 2
host name            : vxserver
file name            : /usr/wind/target/config/mv2304/vxWorks
inet on ethernet (e) : 192.168.15.2:ffffff00
host inet (h)        : 192.168.15.1
user (u)             : phobos
ftp password (pw)    : 10oclock
flags (f)            : 0x0
target name (tn)     : trigvme
startup script (s)   : ~/vxscript/trigvme.start

Attaching network interface dc0... done.
Attaching network interface lo0... done.
Loading... 765800
Starting at 0x100000...

Attaching network interface dc0... done.
Attaching network interface lo0... done.
Mounting NFS file systems from host vxserver for target trigvme:
...done
Loading symbol table from vxserver:/usr/wind/target/config/mv2304/vxWorks.sym ..
.done


 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
 ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
 ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
 ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
 ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
 ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
 ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
 ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
 ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.3.1
 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.5
 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-1997

                               CPU: Motorola MVME2300 - MPC 604r.  Processor #2.

                              Memory Size: 0x2000000.  BSP version 1.1/4.
                             WDB: Ready.

Executing startup script ~/vxscript/trigvme.start ...
shellPromptSet("trigvme > ")
value = 1737252 = 0x1a8224 = shellHistSize + 0x4

# Define default gateway. This is important! The gateway defined in the BootROM
# links only to single host.
#
routeAdd "0", "192.168.15.1"
value = 0 = 0x0

## load PCDP-board support etc...
#ld </export/home/phobos/PhatDAQ/roc/src/phatdaqLib_0407.o
ld </export/home/phobos/PhatDAQ/roc/src/phatdaqLib.o
value = 29211712 = 0x1bdbc40
## unld "phatdaqLib.o"

## load ROC support etc...
ld </export/home/phobos/PhatDAQ/roc/src/roclib.o
value = 29210600 = 0x1bdb7e8
## unld "roclib.o"

ld </export/home/phobos/PhatDAQ/roc/trig/src/roctrig.o
value = 29133568 = 0x1bc8b00
## unld "roctrig.o"

# start Phobos trigger service
</export/home/phobos/PhatDAQ/vxscript/trigvme_service.start
################################################################################

#
# Setting up and start the Phobos trigger service
#
#  to safely reload  phatdaqLib.o
#emm_enable(0)
#emm_int_enable(0)
#emm_int_disconnect()
#unld "phatdaqLib.o"
## Note. Must wait until following command is finished
#
#ld </export/home/phobos/phatdaq/roc/src/phatdaqLib.o
#
#
# define variables
TML0_ADDR=4
new symbol "TML0_ADDR" added to symbol table.
TML0_ADDR = 0x1bdb5b0: value = 4 = 0x4
TML1_ADDR=5
new symbol "TML1_ADDR" added to symbol table.
TML1_ADDR = 0x1bdb578: value = 5 = 0x5
EMM_ADDR=6
new symbol "EMM_ADDR" added to symbol table.
EMM_ADDR = 0x1bdb568: value = 6 = 0x6
EMS_ADDR=7
new symbol "EMS_ADDR" added to symbol table.
EMS_ADDR = 0x1bdbb90: value = 7 = 0x7
pcdp_init();                  /* soft init*/
0x1be0e70 (tShellBoard ): PCDP base = 0x4fa000000
0x1be0e70, addr 0x (tShellfa000400): Boards found:
, 0x1be0e70 (tShellEMS): Warning, board , vers 4 has wrong type 21
/11, switch 0
CSR: 0000,02b2,ffff,0000,0000,0000,0000,0000,ffff,ffff,ffff,ffff
Board 5, addr 0xfa000500, TML1, vers 8/10, switch 0
CSR: 0000,06a8,0000,0000,0000,0000,0000,0000,ffff,ffff,ffff,ffff
Board 6, addr 0xfa000600, EMM, vers 7/20, switch 0
CSR: 0000,0147,0000,0000,0000,0000,0000,0000,ffff,ffff,ffff,ffff
value = 0 = 0x0
pcdp_set(EMM_ADDR,0,0);
value = 0 = 0x0
emm_enable(0);                /* disable module*/
value = 0 = 0x0
emm_int_enable(0);            /* disable interrupts*/
value = 0 = 0x0
#                             /* reset everything*/
pcdp_set(TML0_ADDR,1,0xe000); /* reset everything in L0 */
value = 0 = 0x0
pcdp_set(TML0_ADDR,0,0x0000); /* disable all inputs on L0 */
value = 0 = 0x0
pcdp_set(TML1_ADDR,1,0xe000); /* reset everything in  L1 */
value = 0 = 0x0
pcdp_set(EMM_ADDR, 1,0xe000); /* reset everything in EMM */
value = 0 = 0x0
#
#pcdp_copy_bits(EMM_ADDR, 0,13, 2, 1);     /*disable blocking from TOF*/
pcdp_set(TML0_ADDR,0,0x10ff); /*enable all L0 triggers*/
value = 0 = 0x0
pcdp_set(TML1_ADDR,0,0x1114); /*set L1 prescalers Pr[0]-L0 and Pr[3]-ZCal*/
value = 0 = 0x0
pcdp_set(TML1_ADDR,3,0x1111); /*set L1 prescalers 4:7*/
value = 0 = 0x0
#pcdp_set(TML1_ADDR,1,0x8000); /*reset prescal*/
#pcdp_set(TML1_ADDR,0,0x100); /*enable L1 prescalers Pr[0]-L0 and Pr[3]-ZCal*/

ds_po=0x26         /*enable warnings in case of interrupt nesting > 2 */
ds_po = 0x1bd1b00: value = 38 = 0x26 = '&'
emm_int_setup(); /*setup EMM for interrrupts*/
0x1be0e70 (tShell): Initial ISR 0
0x1be0e70 (tShell): emm_int_setup done, base address = 0xfa000600
0x1be0e70 (tShell): 2    3    4    5    6    7    8    9   10   11
4: 10ff 02b2 ffff 0000 0000 0000 0000 0000 ffff ffff ffff ffff
5: 1114 06a8 0000 0000 0000 0000 0000 0000 ffff ffff ffff ffff
6: 0380 0147 0000 0000 0000 0000 0000 0000 ffff ffff ffff ffff
value = 0x1be0e700 (tShell): 2    3    4    5    6    7    8    9   10   11
4: 10ff 02b2 ffff 0000 0000 0000 0000 0000 ffff ffff ffff ffff
5: 1114 06a8 0000 0000 0000 0000 0000 0000 ffff ffff ffff ffff
6: 0380 0147 0000 0000 0000 0000 0000 0000 ffff ffff ffff ffff
 = 0x0
#
# Everything is ready, spoon reporting task
#
sp trig_report,60
task spawned: id = 0x1bc7a18, name = t1
value = 29129240 = 0x1bc7a18
#
#emm_enable(1);     /* enable module */
emm_int_enable(1); /* enable interrupts */
value = 0 = 0x0
#pcdp_copy_bits(TML1_ADDR,1,13,1,1); /* reset L1, it might be blocked*/
# the process should start

sp roctrig,"192.168.15.1",7000,0 /*data taking to primary phatdaq*/
task spaw0xned: id = 1bb7240B (0xt2oard ): 1bb724PCDP base = 0x0fa000000, name =

40xt21bb7240
 (, addr 0xt2v): alue = Boards found:
290616960xfa00041bb7240 = 0x (00t21b): b7240Warning, board
4,  has wrong type #sp roctrig,"192.1168.15.1",7100,0 /*
data taking to secondary phatdaq*/EMS

ld</export/home/phobos/PhatDAQ/roc/src/latchup.o, vers
2/11, switch 0
CSR: 10ff,02b2,ffff,0000,0000,0000,0000,0000,ffffvalue = ,29180288 = 0xffff1bd41
80 = latchup_in_progress, + 0xffff44c
#sp latchup,60*60*5;/* start latchup service with 5 min sleeping time*/
,
ld </export/home/phobos/PhatDAQ/roc/src/emm_server.offff
0x
1bc7a18 (t1): EMM, Run Stopped
Board 5, addr 0xfa000500, TML1, vers 8/10, switch 0
CSR: 1114,06a8,0000,0000,0000,0000,0000,0000,ffff,ffff,ffff,ffff
Board 6, addr 0xfa000600, EMM, vers 7/20, switch 0
CSR: 0b80,0147,0000,0000,0000,0000,0000,0000,ffff,ffff,ffff,ffff
0x1bb7240 (t2): Scaler V560 at fa000110 initialized
0x1bb7240 (t2): roc - UDP socket client
0x1bb7240 (t2): usage: rocsfi targetname port source type print [sleep_usec]
0x1bb7240 (t2): socket size 31744
value = 29185384 = 0x1bd5568
sp emm_server;
task spawned: id = 0x1bb2218, name = t3
value = 29041176 = 0x1bb2218

emm_stop_run(); /* stop run */
0x1bb2218 (t3): Socket created e, size 1000
0x1be0e70 (tShell): >Process command 8100, 1.0
0x1be0e70 (tShell): Run 0 stopped
0x1be0e70 (tShell): Done
value = 32 = 0x20 = ' '


Done executing startup script ~/vxscript/trigvme.start
trigvme > 0x1bb7240 (t2): (0)Ready to start...
0x1bb7240 (t2): Main loop