boot device : dc
processor number : 0
host name : vxserver
file name : /export/home/vme/VxWorks/mv2304/vxWorks
inet on ethernet (e) : 130.199.65.19:ffffff00
host inet (h) : 130.199.65.17
user (u) : vme
ftp password (pw) : 10oclock
flags (f) : 0x0
target name (tn) : fastbus
startup script (s) : /export/home/vme/fastbus/fastbus.start

Attaching network interface dc0... done.
Attaching network interface lo0... done.
Loading... 765800
Starting at 0x100000...

Attaching network interface dc0... done.
Attaching network interface lo0... done.
Mounting NFS file systems from host vxserver for target fastbus:
...done
Loading symbol table from vxserver:/export/home/vme/VxWorks/mv2304/vxWorks.sym .
..done


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.3.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-1997

CPU: Motorola MVME2300 - MPC 604r. Processor #0.
Memory Size: 0x2000000. BSP version 1.1/4.
WDB: Ready.

Executing startup script /export/home/vme/fastbus/fastbus.start ...
shellPromptSet("fastbus > ")
value = 1737252 = 0x1a8224 = shellHistSize + 0x4

# Define default gateway. This is important! The gateway defined in the BootROM
# links only to single host.
#
#routeAdd "0", "192.168.14.1"
cd "/export/home/vme/fastbus"
value = 0 = 0x0
<fastbus_full.start
shellPromptSet("fastbus > ")
value = 1737252 = 0x1a8224 = shellHistSize + 0x4

# Define default gateway. This is important! The gateway defined in the BootROM
# links only to single host.
#
#AS04261#needed only to go behind local network#routeAdd "0", "192.168.14.1"
#
cd "../roc"
value = 0 = 0x0

##load fastbus libraries
ld <sfi/libsfi/libsfifb.o
value = 29189240 = 0x1bd6478 = fprel + 0xd64

##the following two line is temporary measure to reset Fastbus properly
ld <sfi/examples/test_1881.o
value = 29208296 = 0x1bdaee8
test_1881(6,2)
resetRegisterGroupLca2 = FAE0201C
FastbusTimeoutRegister = FAE02000
FastbusdArbitrationLevelReg = FAE02004
fastPrimDsr = FAE10004
Block Read data stored at address 0x1bdf740 ,dmaptr = 0x9bdf740
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF0003
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF0000
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8033
VME IRQ Level & Vector = FFFF0000
Reset:
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF0057
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF0000
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8033
VME IRQ Level & Vector = FFFF0000
[0]=104f0000, [1]=00000040, [3]=00000000, [5]=Err c040, [7]=00000000, [10]=00003
f00,
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF0857
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF0000
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8033
VME IRQ Level & Vector = FFFF0000
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF0057
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF0000
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8033
VME IRQ Level & Vector = FFFF0000
Module ID = 0x104f0104
[0]=104f0104, [1]=00000080, [3]=00000000, [5]=Err c040, [7]=00000000, [10]=00003
f00,
Executing Readout loop 2 times...
TestGate:
[0]=104f0104, [1]=00000080, [3]=00000000, [5]=Err c040, [7]=00000000, [10]=00003
f01,
Load Next Event:
[0]=104f0104, [1]=00000080, [3]=00000000, [5]=Err c040, [7]=00000000, [10]=00000
001,
fprd_my: 10a001, wc=1
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF0857
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF0000
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8023
VME IRQ Level & Vector = FFFF0000

0000:3402019b
ERROR: Block Read
Sequencer Status Register = FFFFA001
Last Sequencer KeyAddress = FFFF00D7
Fastbus Status Register1 = FFFFF000
Fastbus Status Register2 = FFFF8200
Fastbus Last Primary Addr = 00000000
Next Sequencer Ram Addr = FFFF0000
Fastbus Timeout Register = FFFFFF33
Fastbus Arbitration Level = FFFFFF20
Fastbus Protocol Signal = FFFF0000
Seq. FIFO flag & ECL/NIM = FFFF8023
VME IRQ Level & Vector = FFFF0000
Read 0x0172 words from slot6, dmaptr=09bdf740, nextb=02000041

0000:30040172 30040172 3006013e 300801b4 300a0194 300c01fd 300e01af 3410016d
0020:341201f6 30140164 30160196 301801b0 301a020a 301c01cf 301e019e 34200194
0040:30220140 30240115 34260119 3028019d 342a01e6 302c0181 302e02cd 30300254
0060:343200f5 3034012d 30360157 303801e1 343a017d 343c0195 343e018f 30400196
0080:304200fc 30440176 30460148 344801b2 304a017e 344c01f8 344e01f6 34500128
00a0:345201a2 3054016a 30560125 34580207 345a0190 305c01ba 345e022a 3060018f
00c0:3062019a 3064013a 34660230 346801f2 306a02da 306c020d 306e02e2 307000fe
00e0:3072028c 34740122 3476013b 307801c7 347a01a4 347c01f7 307e0245 dfebe7ff
Header=09bdf844
fprd_my: 0, wc=41

0000:13aa8450 de56ef37 5d408003 8ea5fedf 62074352 e617bcdb 26003acf f5e87fcf
0020:f7360a02 a4cdff97 1f18c082 f34af7f7 42950091 9facfbeb 6c14168c 9ccbfffd
0040:7f330842 ffb5de2f 1620b074 553cfef7 99bd31bc ec0264fc b17c4004 cbfac72e
0060:1832d963 0abcdded ad525842 fcfcde6d 7ecc8344 fc47b5ff 1f89943a edf4bff3
0080:630001bb fdf7f3e5 ef271b10 5f61f773 8e042463 b5f4fa26 09100374 7feffff5
00a0:e9159207 7f3c3fff 17070128 9bf48fff 2338a002 ff6fbfeb cc083111 75679db8
00c0:363410a1 dff6f6a7 f5ae1447 beb0ed7d 8c712485 fef8c7dc ef100a60 3d2efaf7
00e0:d12b4432 95b6ff97 30000041 340001fc 3402019b 30040172 3006013e 300801b4
0100:300a0194 eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee
0120:eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee eeeeeeee
value = 1 = 0x1

## load PCDP-board support etc...
#unld "phatdaqLib.o"
ld <src/phatdaqLib.o
value = 29207288 = 0x1bdaaf8

## load ROC library, it should be after phatdaqLib as it uses ds_po
#unld "roclib.o"
ld <src/roclib.o
value = 29188776 = 0x1bd62a8 = fprel + 0xb94

## load ROC
#unld "rocsfi.o"
ld <sfi/src/rocsfi.o
value = 29194080 = 0x1bd7760

## start ROC (program, server IP, port, ROC_ID, ROC_type, printout, sleep_usec)
## don't start automatically
# the following is proper one for Run2k
#sp rocsfi,"192.168.14.1",7000,2,3,0,0

# connecting to the host
sp rocsfi,"130.199.65.17",7000,1,3,0,0
task spawned: id = 0x1bbf588, name = t1
value = 29095304 = 0x1bbf588
#AS11227#sp rocsfi,"192.168.14.1",7000,1,3,0,0


#rocsfi_delay_between_test_pulses = 0
#rocsfi_delay_between_test_pulses = 2
#rocsfi_delay_between_test_pulses = 60
#roc_delay_0xbetween_packets = 1bbf588500000 (t1): PCDP base = 0x
fa000000#rocsfi_delaynext
scan = 100000000x1bbf588
(t1): Boards found:
0x1bbf588 (t1): #sp pcdp_print,10
0 1 2 3 4 5 6 7 8 9 10 11
7: 0380 02b2 0000 8100 0000 0000 0000 0000 ffff ffff ffff ffff
0,0x00100x1bbf588
(t1): Warning, board #rocsfi_trigtim6eout=10000000 has wrong type
3 != 0
0x1bbf588# waiting for ( handshake:t1): Initial ISR
0
0x1bbf588
(t1): ems_int_setup done, base address = 0x#Enable Warnifa000700ng1, it is n
ot used by now0x1bbf588
(t1):
0 1 2 3 4 5 6 7 8 9 10 11
7: 0380 02b2 0000 8100 0000 0000 0000 0000 ffff ffff ffff ffff
ds_0xpo = 41bbf588 (t1):
roc - UDP socket client
ds_po0x1bbf588 = (t1): usage: rocsfi targetname port source type print [sleep_u
sec]
0x0x1bbf5881bcc098 (t1): socket size : value = 317444
= 0x4
#Enable Warning0. Actually it should be enabled all the time
#ds_po = ds_po + 2
#Enable DS_PO_ROC logging from the ROC
#ds_po = ds_po + 8
#Enable DS_PO_ROC logging from the ROC's roclib functions
#ds_po = ds_po + 0x40
#Enable DS_PO_TMP additional logging
#ds_po = ds_po + 0x200
#Enable DS_PO_TDCKLUDGE. TDC Sparce Data Scan problem
#ds_po = ds_po + 0x100

Done executing startup script /export/home/vme/fastbus/fastbus.start
0x1bbf588 (t1): (4)Waitformsg Timeout 0x0. Send waitingfor message
0x1bbf588 (t1): (0)Waiting for registration...
fastbus > 0x1bbf588 (t1): (4)Waitformsg Timeout 0x0. Send waitingfor message
resetRegisterGroupLca2 = FAE0201C
FastbusTimeoutRegister = FAE02000
FastbusdArbitrationLevelReg = FAE02004
fastPrimDsr = FAE10004
0x1bbf588 (t1): Init crate done.
0x1bbf588 (t1): Crate was succesfully configured, scanmask = 80
0x1bbf588 (t1): Main loop