If you are on phobosnt then locate window X (this is host phobosx) otherwise you can run on any X client at .65 network.

ssh phobos@usp.phobos.bnl.gov

Last login: Fri Dec 6 19:29:46 2002 from phobosun

Sun Microsystems Inc. SunOS 5.8 Generic February 2000

Sun Microsystems Inc. SunOS 5.8 Generic February 2000

Executing /etc/.login

executing .cshrc

Executing /export/home/phobos/.login

source start.csh

Two windows will appear DQ and DQC.

In DQ enter:

>source start.csh

Accepting...

In DQC enter:

>source start.csh

*******************************************

* *

* W E L C O M E to R O O T *

* *

* Version 2.23/12 1 February 2000 *

* *

* You are welcome to visit our Web site *

* http://root.cern.ch *

* *

*******************************************

CINT/ROOT C/C++ Interpreter version 5.14.25, Nov 25 1999

Type ? for help. Commands must be C++ statements.

Enclose multiple statements between { }.

root [0]

Processing runcontrol.C...

Note: posix.dll is not found. Do 'sh setup' in $CINTSYSDIR/lib/posix directory if you use UNIX.

phatdaq control session

Cannot connect to eb port 7001. Start phatdaq first!

Connecting to 130.199.65.20 ...Done

started.

Use rc_command.C(command,argument) to control phatdaq.

root [1]

Now you are ready to start the run.

All commands should go to DQC window.

For safe start please disable your triggers (otherwise you may create a zomby in the DQ and need to reboot usp.phobos.bnl.gov)

root [1] rc_start(RUN_ALLBEAM);

Make sure that rate of does not exceed 50 Hz.

now you can enable your triggers

root [1] rc_stop_run();

After stopping each run, one must exit in both DQC and DQ:

In DQC:

root [1] .q

Make sure that in DQ you have got prompt >. If not then you are unhappy: the zomby is there and you must reboot usp.phobos.bnl.gov (call me home 281 4474 or beeper #7602)