Oracle8 Enterprise Edition Installation

Oracle Advanced Networking Option Installation
Release 8.0.5 for Windows NT
A66615-01

Library

Product

Oracle Advanced Networking Option
for Windows NT Installation

This CD-ROM Insert describes how to install the Oracle Advanced Networking Option (ANO) included on the following CDs:

ANO Domestic Edition
ANO Export Edition
ANO Upgrade Edition

Specific topics discussed include:

Products Included on this CD

Pre-Installation

Products Available for Installation

Install ANO on Windows NT and Windows 95 and Windows 98

Install ANO on Windows 3.1x

Remove Oracle Products

Products Included on this CD

Windows NT

Product Revision

Advanced Networking Option Release Notes

8.0.5.0.0

Assistant Common Files

8.0.5.0.0

Java(TM) Runtime Environment

1.1.1.0.0

Oracle Documentation

8.0.5.0.0

Oracle Installer

3.3.1.0.0C

Oracle Names Server

8.0.5.0.0

Oracle Net8 Assistant

8.0.5.0.0

Oracle Net8 Client

8.0.5.0.1

Oracle Net8 Server

8.0.5.0.0

Oracle LU6.2 Protocol Adapter

8.0.5.0.0

Oracle Named Pipes Protocol Adapter

8.0.5.0.0

Oracle SPX Protocol Adapter

8.0.5.0.0

Oracle TCP/IP Protocol Adapter

8.0.5.0.0

DCE Integration (for Gradient PC-DCE)

8.0.5.0.0

CyberSAFE Challenger Authentication Adapter

8.0.5.0.0

Kerberos Authentication Adapter

8.0.5.0.0

Identix Biometrics Adapter

8.0.5.0.0

SecurID Authentication Adapter

8.0.5.0.0

Oracle8 Utilities

8.0.5.0.0

Required Support Files

8.0.5.0.0

Windows 95

Product Revision

Advanced Networking Option Release Notes

8.0.5.0.0

Assistant Common Files

8.0.5.0.0

Java(TM) Runtime Environment

1.1.1.0.0

Oracle Documentation

8.0.5.0.0

Oracle Installer

3.3.1.0.0C

Oracle Net8 Assistant

8.0.5.0.0

Oracle Net8 Client

8.0.5.0.1

Oracle Named Pipes Protocol Adapter

8.0.5.0.0

Oracle SPX Protocol Adapter

8.0.5.0.0

Oracle TCP/IP Protocol Adapter

8.0.5.0.0

DCE Integration (for Gradient-PC-DCE)

8.0.5.0.0

CyberSAFE Challenger Authentication Adapter

8.0.5.0.0

Kerberos Authentication Adapter

8.0.5.0.0

Identix Biometrics Adapter

8.0.5.0.0

SecurID Authentication Adapter

8.0.5.0.0

Oracle8 Utilities

8.0.5.0.0

Required Support Files

8.0.5.0.0

Windows 3.1x

Note:

Oracle products for Windows 3.1x are provided for backward compatibility with Oracle7. Note that there are no Oracle8 components except documentation available on Windows 3.1x.


Product	Revision
Advanced Networking Option Release Notes	8.0.5.0.0
GUI Common Files	2.5.0.0.0Y
Oracle Documentation	8.0.5.0.0
Oracle Installer	3.1.4.1.5
Oracle Network Manager	3.1.0.5.1
SQL*Net Client	2.3.3.0.1
Oracle DECnet Protocol Adapter	2.3.3.0.0
Oracle LU6.2 Protocol Adapter	2.3.3.0.0
Oracle Named Pipes Protocol Adapter	2.3.3.0.0
Oracle NetBIOS Protocol Adapter	2.3.3.0.0
Oracle SPX Protocol Adapter	2.3.3.0.1
Oracle TCP/IP Protocol Adapter	2.3.3.0.0
CyberSAFE Challenger Authentication Adapter	2.3.3.0.0
Kerberos Authentication Adapter	2.3.3.0.0
SecurID Authentication Adapter	2.3.3.0.0
Required Support Files	7.3.3.0.0

Pre-Installation

Before you install ANO, review the hard copy Release Notes.
Install any Oracle8 client or Oracle8 database software you may require.
Install and test your network hardware and software, if applicable.

CAUTION:

Net8 and ANO have some DLLs that share the same name but not the same functionality. Because of this, do not install Net8 Client or Server after installing ANO. If you do, ANO will not work because some DLLs will be overwritten.

Attention:

Two versions of ANO cannot co-exist in the same Oracle home directory if they are of the same major release (for example, release 8.0.5 and release 8.0.3) because they depend on common files; one overwrites the other.

System Requirements

Before installation, check the following requirements:

Hardware Requirements
Software Requirements

Hardware Requirements

ANO requires the following hardware:

Windows NT Server Clients¹

Personal computer based on a Pentium processor. Multi-processor computers are also supported.

Personal computer based on an Intel 80486 processor or higher.

48 MB RAM

32 MB RAM for Windows NT
24 MB RAM for Windows 95 and Windows 98

Installed and functioning network

Installed and functioning network

200 MB minimum hard disk space is recommended.
To find out how much disk space is required by each product, select the product in the Software Asset Manager² window, and view the disk space requirements in the information field.

100 MB hard disk space is recommended.
To find out how much disk space is required by a product, select the product in the Software Asset Manager2 window, and view the disk space requirements in the information field.

SecurID Authentication Adapter requires a token card.

¹ ANO for Windows 3.1x is provided for backward compatibility with Oracle7. Note that there are no Oracle8 components available on Windows 3.1x. ANO for Windows 3.1x requires 8 MB RAM.
² To access the Software Asset Manager window, start Oracle Installer, and select Custom. If you do not want to perform a Custom after reviewing the disk space requirements of products, click Exit and begin the installation process again.

Windows NT Server	Clients¹
Personal computer based on a Pentium processor. Multi-processor computers are also supported.	Personal computer based on an Intel 80486 processor or higher.
48 MB RAM	32 MB RAM for Windows NT 24 MB RAM for Windows 95 and Windows 98
Installed and functioning network	Installed and functioning network
200 MB minimum hard disk space is recommended. To find out how much disk space is required by each product, select the product in the Software Asset Manager² window, and view the disk space requirements in the information field.	100 MB hard disk space is recommended. To find out how much disk space is required by a product, select the product in the Software Asset Manager2 window, and view the disk space requirements in the information field.
	SecurID Authentication Adapter requires a token card.

Software Requirements

ANO requires the following software:

Windows NT Server Clients¹

One of the following:

Windows NT Workstation 4.0

Windows NT Server 4.0

One of the following:

Windows NT Workstation 4.0

Windows NT Server 4.0

Windows 95/98

Windows 3.1 or higher, running in Enhanced Mode

Windows for Workgroups 3.11

One of the following web browsers to view Oracle8 online documentation:

Netscape Navigator version 3.0 or later. Visit: http://www.netscape.com

Microsoft Internet Explorer version 3.0 or later. The documentation does not work with version 3.0.2. Visit: http://www.microsoft.com

One of the following web browsers to view Oracle8 online documentation:

Netscape Navigator version 3.0 or later. Visit: http://www.netscape.com

Microsoft Internet Explorer version 3.0 or later. The documentation does not work with version 3.0.2. Visit: http://www.microsoft.com

Oracle8 Enterprise Edition release 8.0.5

One of the following:

Oracle8 Client release 8.0.5 for Windows NT and Windows 95 and Windows 98

Oracle7 Client release 7.3.3 for Windows 3.1x.

One of the following:

Oracle Net8 Server release 8.0.5²

SQL*Net Server release 2.3.3 installed on the server machine if you are using ANO release 2.3.3 for Windows 3.1x

One of the following:

Oracle Net8 Client release 8.0.52 for Windows NT and Windows 95 and Windows 98

SQL*Net Client release 2.3.3³ for Windows 3.1x

Appropriate network transport protocol software.

Appropriate network transport protocol software.

CyberSAFE, Kerberos and SecurID Authentication Adapters require TCP/IP to be installed.

CyberSAFE, Kerberos and SecurID Authentication Adapters require TCP/IP to be installed.

CyberSAFE Challenger Authentication Adapter requires all of the following:

Winsock interface

CyberSAFE Application Security Toolkit version 1.1

CyberSAFE Challenger release 5.3.1 on the authentication server

CyberSAFE Authentication Adapter requires: all of the following:

Winsock interface

CyberSAFE Application Security Toolkit version 1.1 for Windows NT and Windows 95 and Windows 98 or release 1.0.4a for Windows 3.1x

CyberSAFE Challenger Client release 5.3.1 for Windows NT and Windows 95 and Windows 98 or release 5.2.7 for Windows 3.1x

Identix (Biometric) Authentication Adapter requires Identix TouchSafe II Encrypt version 1.4 or later.

Identix (Biometric) Authentication Adapter requires Identix TouchSafe II Encrypt version 1.4 or later.

Kerberos Authentication Adapter requires Kerberos release 5.4.2 on the authentication server.

SecurID Authentication Adapter requires Security Dynamics ACE Server version 1.2.4 on the authentication server.

DCE Integration requires Gradient PC-DCE version 2.0.

DCE Integration requires Gradient PC-DCE version 2.0 on Windows NT and Windows 95 and Windows 98.

¹ ANO for Windows 3.1x is provided for backward compatibility with Oracle7. Note that there are no Oracle8 components available on Windows 3.1x.
² ANO release 8.0.5 is only compatible with Net8 release 8.0.5.
³ ANO for Windows 3.1x release 2.3.3 is only compatible with SQL*Net release 2.3.3.

Windows NT Server	Clients¹
One of the following: Windows NT Workstation 4.0 Windows NT Server 4.0	One of the following: Windows NT Workstation 4.0 Windows NT Server 4.0 Windows 95/98 Windows 3.1 or higher, running in Enhanced Mode Windows for Workgroups 3.11
One of the following web browsers to view Oracle8 online documentation: Netscape Navigator version 3.0 or later. Visit: http://www.netscape.com Microsoft Internet Explorer version 3.0 or later. The documentation does not work with version 3.0.2. Visit: http://www.microsoft.com	One of the following web browsers to view Oracle8 online documentation: Netscape Navigator version 3.0 or later. Visit: http://www.netscape.com Microsoft Internet Explorer version 3.0 or later. The documentation does not work with version 3.0.2. Visit: http://www.microsoft.com
Oracle8 Enterprise Edition release 8.0.5	One of the following: Oracle8 Client release 8.0.5 for Windows NT and Windows 95 and Windows 98 Oracle7 Client release 7.3.3 for Windows 3.1x.
One of the following: Oracle Net8 Server release 8.0.5² SQL*Net Server release 2.3.3 installed on the server machine if you are using ANO release 2.3.3 for Windows 3.1x	One of the following: Oracle Net8 Client release 8.0.52 for Windows NT and Windows 95 and Windows 98 SQL*Net Client release 2.3.3³ for Windows 3.1x
Appropriate network transport protocol software.	Appropriate network transport protocol software.
CyberSAFE, Kerberos and SecurID Authentication Adapters require TCP/IP to be installed.	CyberSAFE, Kerberos and SecurID Authentication Adapters require TCP/IP to be installed.
CyberSAFE Challenger Authentication Adapter requires all of the following: Winsock interface CyberSAFE Application Security Toolkit version 1.1 CyberSAFE Challenger release 5.3.1 on the authentication server	CyberSAFE Authentication Adapter requires: all of the following: Winsock interface CyberSAFE Application Security Toolkit version 1.1 for Windows NT and Windows 95 and Windows 98 or release 1.0.4a for Windows 3.1x CyberSAFE Challenger Client release 5.3.1 for Windows NT and Windows 95 and Windows 98 or release 5.2.7 for Windows 3.1x
Identix (Biometric) Authentication Adapter requires Identix TouchSafe II Encrypt version 1.4 or later.	Identix (Biometric) Authentication Adapter requires Identix TouchSafe II Encrypt version 1.4 or later.
Kerberos Authentication Adapter requires Kerberos release 5.4.2 on the authentication server.
SecurID Authentication Adapter requires Security Dynamics ACE Server version 1.2.4 on the authentication server.
DCE Integration requires Gradient PC-DCE version 2.0.	DCE Integration requires Gradient PC-DCE version 2.0 on Windows NT and Windows 95 and Windows 98.

Products Available for Installation

Oracle Installer enables you to install, update, and remove ANO products quickly. When you run Oracle Installer, a dialog box displays installation options. When you select an option, a group of products is automatically installed. The options that appear depend upon the operating system you are using.

If Using...

These Installation Options Are Available...

See Section...

Windows NT
ANO Client
ANO Server
Custom¹

"ANO Client"
"ANO Server"

Windows 95 and Windows 98
ANO Client
Custom1

"ANO Client"

Windows 3.1x²
Typical
Custom Installation1

"Typical"

¹ The Custom option enables you to selectively install from a list of all products available for your operating system.
² ANO for Windows 3.1x is provided for backward compatibility with Oracle7. Note that there are no Oracle8 components available on Windows 3.1x.

If Using...	These Installation Options Are Available...	See Section...
Windows NT	ANO Client ANO Server Custom¹	"ANO Client" "ANO Server"
Windows 95 and Windows 98	ANO Client Custom1	"ANO Client"
Windows 3.1x²	Typical Custom Installation1	"Typical"

The following table lists the components included in the:

ANO Client option
ANO Server option
Typical option


Product	ANO Client	ANO Server	Typical
Assistant Common Files	yes	yes	no
Java Runtime Environment	yes	yes	no
Oracle Home Selector	yes	yes	no
Oracle Advanced Networking Option, including Network Security and Single Sign-On¹ (and DCE Integration for Gradient PC-DCE for Windows NT and Windows 95 and Windows 98)	yes	yes	yes
Oracle Advanced Networking Option Release Notes	yes	yes	yes
Oracle Documentation	yes	yes	yes
Oracle Installer	yes	yes	yes
Oracle Net8 Client, including Oracle Net8 Assistant, Oracle Net8 Easy Config, and Oracle Protocol Adapters	yes	yes	no
SQLNet Client, including Oracle Network Manager, SQLNet Easy Config, and Oracle Protocol Adapters	no	no	yes
Oracle Net8 Server, including Oracle Net8 Assistant, Oracle Net8 Easy Config, Oracle Protocol Adapters, and Oracle Names Server (for Windows NT only)	no	yes	no
Oracle8 Utilities	yes	yes	no
Required Support Files	yes	yes	yes

¹ The Network Security and Single-On option allows you to install the authentication adapters.

Install ANO on Windows NT and Windows 95 and Windows 98

CAUTION:

If you click Cancel in any Oracle Installer dialog box, Oracle Installer exits.

To install ANO products:

Start your operating system. If you are running Windows NT, log on to your Windows NT server as a member of the Administrators group.
Stop all Oracle applications (if any are running).
If installing on Windows NT, stop all Oracle services (if any are running). To stop services:

Choose Start > Settings > Control Panel.
From the Control Panel, double-click Services.
If any Oracle services exist and have the status Started, select the service, and click Stop.
Click Close to exit the Services window.

Insert the Oracle Advanced Networking Option CD-ROM.

The operating system automatically detects your Oracle Advanced Networking Option CD-ROM. The Oracle8 Products-Autorun dialog box appears and prompts you to make a selection:

Begin Installation
Browse Information
Explore CD

Click Begin Installation.

Each time you insert your CD-ROM, the process described in Step 4 occurs. To restart Oracle Installer without removing and re-inserting your CD-ROM, select the drive to which the CD-ROM is mapped, and double-click SETUP.EXE.

The Oracle Installation Settings dialog box appears.

Specify a company name, Oracle home name, Oracle home location, and Oracle home language, where:


Field	Description
Company Name	Enter name of the company to which this copy of Oracle software is licensed.
Oracle Home Name	Enter name you want to use for this Oracle Home. If this is the first time you are installing Oracle products on this machine, Oracle Corporation recommends you accept the default home name, DEFAULT_HOME. DEFAULT_HOME is also the Oracle name used for previous installations of Oracle software on your machine. The Oracle Home name must be 1 to 16 characters long, and can only include alphanumeric characters and underscores.
Oracle Home Location	Enter subdirectory under which you want the products for this Oracle home to be installed. The default value for the home location on a machine on which no other Oracle products are installed is the largest available local drive.
Oracle Home Language	Enter the language you would like to use to install and run Oracle products. The default language, English, is installed in addition to any other language you select.

The Select Installation Options dialog box appears.

Select an installation option, then click OK:


For the Installation Option....	See Section...
ANO Client (Windows NT or Windows 95)	"ANO Client"
ANO Server (Windows NT only)	"ANO Server"
Custom	"Custom"

ANO Client

To install ANO Client:

Select the required components from the DCE Integration and Authentication Adapter Installation dialog box, then click OK:

DCE Integration (for Gradient PC-DCE)
CyberSAFE Challenger Authentication Adapter
Identix Biometric Authentication Adapter
Kerberos Authentication Adapter
SecurID Authentication Adapter

Encryption and checksumming are automatically installed whether adapters are chosen or not.

The Installing Oracle Documentation dialog box appears.

Select to install Oracle8 HTML documentation on your hard drive or leave it on your CD-ROM, then click OK.

ANO installation continues. A progress bar appears, indicating the percentage completion of the installation. The Installation Completed dialog box appears.

Click Yes to view the documentation, click No to exit Oracle Installer, or click Help for online help.

ANO Server

To install ANO Server:

Select the required components from the DCE Integration and Authentication Adapter Installation dialog box, then click OK:

DCE Integration (for Gradient PC-DCE)
CyberSAFE Challenger Authentication Adapter
Identix Biometric Authentication Adapter
Kerberos Authentication Adapter
SecurID Authentication Adapter

Encryption and checksumming are automatically installed whether adapters are chosen or not.

The Installing Oracle Documentation dialog box appears.

Select to install Oracle8 HTML documentation on your hard drive or leave it on your CD-ROM, then click OK.

ANO installation continues. A progress bar appears, indicating the percentage completion of the installation. The Installation Completed dialog box appears.

Click Yes to view the documentation, click No to exit Oracle Installer, or click Help for online help.

Custom

The Software Asset Manager window displays all products available for installation:

Select the products to install.

The products available to install are listed on the left side of the window. The Oracle products you have already installed appear on the right side of the window. To see a brief description of a component, click on the name of that component.

To select multiple products for installation, press the CTRL key as you make your selections.

Click Install to install the product(s) you have selected.
Provide appropriate responses to any dialog boxes that appear.

Custom Installation continues. A progress bar appears, indicating the percentage completion of the installation. The Installation Completed dialog box appears.

Click OK to acknowledge the Installation Completed dialog box.
To exit Oracle Installer, click Exit from the Software Asset Manager window, then click Yes.

Install ANO on Windows 3.1x

CAUTION:

SQL*Net and ANO have some DLLs that share the same name but not the same functionality. Because of this, do not install SQL*Net Client after installing ANO. If you do, ANO will not work because some DLLs will be overwritten.

If you click Cancel in any Oracle Installer dialog box, Oracle Installer exits.

To install ANO products:

Start Windows 3.1x.
Stop all applications that are running.
Insert the Oracle8 Client CD-ROM into your CD-ROM drive.
Start Oracle Installer:

Open File Manager.
Select the drive to which the CD-ROM is mapped.
Double-click SETUP.EXE. If you want to install 16-bit ANO on Windows NT or Windows 95 and Windows 98 clients, navigate to the WINDOWS directory and double-click SETUP.EXE.

The Language dialog box appears.

Select a language, or click OK to accept the default language, English.

The default language, English, is installed in addition to any other language you select.

The Oracle Installation Settings dialog box appears.

Specify a company name and Oracle home directory in which to install products, then click OK.

The Installation Type dialog box appears.

Select an installation option, then click OK:


For the Installation Option....	See Section...
Typical	"Typical", below
Custom Installation	"Custom Installation"

Typical

The Information dialog box appears if SQL*Net Client has not been installed. Go to Step 1 below.

If SQL*Net has been installed, the ANO Installation dialog box appears. Go to Step 2 below.

To install SQL*Net Client:

Click OK in the Information dialog box.

The Oracle SQL*Net Adapter Selection dialog box appears.

Select the adapter(s) you wish to install, then click OK.

Continue to Step 2.

Select the required components from the ANO Installation dialog box, then click OK:

Network Security and Single Sign-On (checked by default)
Oracle Documentation


For the option....	Perform the following...
Network Security and Single Sign-On	Select the required components from the Authentication Adapters dialog box, then click OK CyberSAFE Challenger Authentication Adapter Kerberos Authentication Adapter SecurID Authentication Adapter Encryption and checksumming are automatically installed whether adapters are chosen or not.
Oracle Documentation	Select to install Oracle8 HTML documentation on your hard drive or leave it on your CD-ROM from the Oracle Documentation dialog box, then click OK.

ANO installation continues. A progress bar appears, indicating the percentage completion of the installation. The Information dialog box appears with an "Installation Completed" message.

Click OK to acknowledge the message.

Custom Installation

The Software Asset Manager window displays all products available for installation:

Select the products to install.

To select multiple products for installation, press the CTRL key as you make your selections.

Click Install to install the product(s) you have selected.
Provide appropriate responses to any dialog boxes that appear.

Custom Installation continues. A progress bar appears, indicating the percentage completion of the installation. The Information dialog box appears with an "Installation Completed" message.

Click OK to acknowledge the message.
To exit Oracle Installer, click Exit from the Software Asset Manager window, then click Yes.

Remove Oracle Products

To remove Oracle products:

Stop all Oracle services.
Start Oracle Installer.
The Products Installed field displays in the right portion of the Software Asset Manager window.
Select the product(s) you want to remove from the Installed Products field.
Click Remove.

Oracle Installer warns you of any product dependencies that can cause problems if particular products are removed, and prompts you to confirm the de-installation.

Library

Product