Hello. Unfortunately, this will take longer. I replaced the SCSI disk with the back up. But, it still has the same problem. I let you know when I finish fixing. Hiro (NOTE: in case some of you are interested in what is the problem, Here is the error (a lot of the same messages.) Feb 5 11:51:48 pii3 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 8000002 Feb 5 11:51:48 pii3 kernel: Current sd08:01: sense key Aborted Command Feb 5 11:51:48 pii3 kernel: Additional sense indicates Scsi parity error Feb 5 11:51:48 pii3 kernel: I/O error: dev 08:01, sector 150384 ) flemming videbaek wrote: > Pii3 lost it's system disk overnight. It has been replace, and is > currently being configured. If all goes well > Hiro tells me it should be back in about one hour if not before > pending unforeseen problems. > > ---------------------------------------------------------------- > Flemming Videbaek > Physics Department > Brookhaven National Laboratory > > e-mail: videbaek@bnl.gov <mailto:videbaek@bnl.gov> > phone: 631-344-4106 > >------------------------------------------------------------------------ > >_______________________________________________ >Brahms-l mailing list >Brahms-l@lists.bnl.gov >http://lists.bnl.gov/mailman/listinfo/brahms-l > > _______________________________________________ Brahms-l mailing list Brahms-l@lists.bnl.gov http://lists.bnl.gov/mailman/listinfo/brahms-lReceived on Thu Feb 5 13:04:04 2004
This archive was generated by hypermail 2.1.8 : Thu Feb 05 2004 - 13:04:25 EST