Re: [Brahms-dev-l] Eff_Tofw_Run4_auau_Prot_90_5_cut10.data corrupt?

Hi,

I have copied the following files from Steve's dir to the official
place:

Eff_Tfw2_Run4_auau_KMinus_40_5_cut10.data
Eff_Tfw2_Run4_auau_KMinus_90_5_cut10.data
Eff_Tfw2_Run4_auau_KPlus_40_5_cut10.data
Eff_Tfw2_Run4_auau_PBar_40_5_cut10.data
Eff_Tfw2_Run4_auau_Pion_40_5_cut10.data
Eff_Tfw2_Run4_auau_Prot_40_5_cut10.data
Eff_Tfw2_Run5_pp_KMinus_45_5_cut10.data
Eff_Tofw_Run4_auau_KMinus_40_5_cut10.data
Eff_Tofw_Run4_auau_KMinus_90_5_cut10.data
Eff_Tofw_Run4_auau_KPlus_40_5_cut10.data
Eff_Tofw_Run4_auau_KPlus_90_5_cut10.data
Eff_Tofw_Run4_auau_PBar_40_5_cut10.data
Eff_Tofw_Run5_pp_KMinus_90_5_cut10.data
Eff_Tofw_Run5_pp_PBar_90_5_cut10.data
Eff_Tofw_Run5_pp_Pion_90_5_cut10.data

In addition I have copied the 45deg files for run4 from Catalin (Tfw and Tfw2). 

And I have made soft links for Run4_auau_62 to Run4_auau, for mrs ffs
and fs.

I found a strange set of files:
Eff_Run5_KPlus_2_5_cut4.data
Eff_Run5_KPlus_4_5_cut4.data
Eff_Run5_KPlus_8_5_cut4.data
Eff_Run5_PBar_2_5_cut4.data
Eff_Run5_PBar_4_5_cut4.data
Eff_Run5_PBar_8_5_cut4.data
Eff_Run5_Pion_2_5_cut4.data
Eff_Run5_Pion_8_5_cut4.data
Eff_Run5_Prot_2_5_cut4.data
Eff_Run5_Prot_4_5_cut4.data
Eff_Run5_Prot_8_5_cut4.data

with some pp links to some of them. They do not follow the hardcoded
name values in the GeantCorrection class, as they should have specie
specified after the Run period. Are these for pp??? cucu??? cucu_at_62???
Can they be used for all sets?

Cheers,
	Truls


On Tue, 2007-03-06 at 08:02 -0500, Flemming Videbaek wrote:
> Hi Truls,
> 
> May I suggest you take steve files and move to the data08/.. directories.
> There are to the best of my knowledge no difference for tofw corrections between 200 and 62 gev. The only things that
> matter is the geometry, detectors and materials in Geant since the corrections are calculated from single particles at a given 
> energy.
> Thus there are some difference between different run period, but in particular between AA and pp where different counters (t0) were
> installed.
> 
> Flemming
> 
> PS sorry for the confusion, those old run04 files ought to have been in the directory.
> 
> 
> 
> --------------------------------------------
> Flemming Videbaek
> Physics Department
> Bldg 510-D
> Brookhaven National Laboratory
> Upton, NY11973
> 
> phone: 631-344-4106
> cell:       631-681-1596
> fax:        631-344-1334
> e-mail: videbaek @ bnl gov
> ----- Original Message ----- 
> From: "Stephen Sanders" <ssanders_at_ku.edu>
> To: "Catalin Ristea" <ristea_at_nbi.dk>
> Cc: <brahms-dev-l_at_lists.bnl.gov>
> Sent: Tuesday, March 06, 2007 7:50 AM
> Subject: Re: [Brahms-dev-l] Eff_Tofw_Run4_auau_Prot_90_5_cut10.data corrupt?
> 
> 
> > Hi Truls,  My cache of correction files is at
> > /brahms/u/sanders/analysis/corrections/eff/ana/data
> > ...steve
> >
> > On Mar 6, 2007, at 6:43 AM, Catalin Ristea wrote:
> >
> >>
> >>   Hi Truls,
> >>
> >>   I did the systematic geant corrections for the run04 AuAu data and
> >> run05 PP data.
> >>   They are not (yet) official because I need to check the files (for
> >> reasons you said, points missing for the graphs). They'll reach soon
> >> the data08/corrections directory.
> >>
> >>   As you have seen, there are only several of the mrs corrections in
> >> our official repository. They are early files, done by Flemming,
> >> Selemon, Steve,... and (probably) some of them were done also for
> >> debugging purposes. I have to see what are the differences with my
> >> files, to see what needs to be overwritten/added.
> >>
> >>   I doubt you can use  straight forward the files from 200 for the
> >> 62.4 run. Even if the geometry is the same, there still could be
> >> differences.
> >>
> >> Kind regards,
> >> Catalin.
> >>
> >>
> >> On Tuesday 06 March 2007 13:17, Truls Martin Larsen wrote:
> >>> Hi,
> >>>
> >>> this file looks strange it only has data point above 4 GeV (where
> >>> you cant get TOFW proton pid anyhow...) so all GeantCorrection
> >>> class does is returning 0 fr the Eval() function...
> >>>
> >>> /brahms/data08/corrections/geantSim/Eff_Tofw_Run4_auau_Prot_90_5_cu
> >>> t10.data
> >>>
> >>> And there must be some people using this file, since this is 200GeV
> >>> AuAu 2004 data... I wanted to use it for the 62 GeV Data...
> >>>
> >>> Cheers,
> >>> Truls
> >>
> >> -- 
> >> Catalin Ristea---------------------------------
> >> High Energy and Heavy Ions Group
> >> Niels Bohr Institute
> >> Blegdamsvej 17, 2100 Copenhagen, Denmark
> >> Tel (+45) 35 32 54 04 / Fax (+45) 35 32 50 16
> >>
> >> E-mail: catalin.ristea_at_nbi.dk
> >> http  : www.nbi.dk/~ristea
> >> -----------------------------------------------
> >> _______________________________________________
> >> Brahms-dev-l mailing list
> >> Brahms-dev-l_at_lists.bnl.gov
> >> http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
> >
> > _______________________________________________
> > Brahms-dev-l mailing list
> > Brahms-dev-l_at_lists.bnl.gov
> > http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
> > 
> 
> _______________________________________________
> Brahms-dev-l mailing list
> Brahms-dev-l_at_lists.bnl.gov
> http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
> 

_______________________________________________
Brahms-dev-l mailing list
Brahms-dev-l_at_lists.bnl.gov
http://lists.bnl.gov/mailman/listinfo/brahms-dev-l