Re: [Brahms-dev-l] Making gtr files

Hi Selemon,

Actually the rmdata.rb script will fix the database and remove histograms
etc..

If you are in doubt how to use this, please take a look in the analysis note
52 and 53 that describes the organization.
It seems reasonable up to date.

flemming

----------------------------------------------------------------
Flemming Videbaek
Physics Department
Brookhaven National Laboratory

e-mail: videbaek@bnl.gov
phone: 631-344-4106
----- Original Message ----- 
From: "Hironori Ito" <hito@rcf.rhic.bnl.gov>
To: "Bekele, Selemon" <bekeleku@ku.edu>; <brahms-dev-l@lists.bnl.gov>
Sent: Friday, August 12, 2005 5:15 PM
Subject: Re: [Brahms-dev-l] Making gtr files


> Hello.  To remove your files, you must use rmdata.rb program (in
> bramreco) to remove files from our data disks and to change our database
> entries.  Since you already remove files manually, the database must be
> fixed.  I will fix the database when I get back  (There is a script to
> fix the database.).    As for data disks use, we have to be careful
> about the use and delete the duplicate files.  For anybody doing
> calibrations, please use /home disks in rcas machine.  Data disks should
> be only used for official data files.  Condor allows a user to use local
> data.  And, using rootd, a user can access local files remotely.
> Therefor, either way, a user does not need to use data disks for
> personal files.  I guess we should start delete those files if the data
> disks are full.
>
> Hiro
>
>
> Bekele, Selemon wrote:
>
> >Hi Hiro,
> >
> >   hope you are doing fine. How was QM05? I tried to make some gtr files
and put them on /brahms/data18.
> >some of my jobs finished OK, some others did not due to insufficient disk
space. I then removed all the files
> >I made using the rm command. But web interface to the datalocation still
shows that they exist. I am not sure
> > if there was a script to delete files from disks and update the database
at the same time. How could I corect
> > the info in the data base for data18?
> >   I hoped people would delete files they do not need so that I generate
new gtr files to proceed with the slewing
> >calibration for the FS. I want to put gtr files from 20 runs each on
data01,02,05,06,07,11,12,13,15, and 17 for
> >the time being and later move them to /home/ directories on some of the
rcas machines. Do you think that works?
> >
> >Thanks,
> >
> >Selemon,
> >
> >
> >-----Original Message-----
> >From: Hironori Ito [mailto:hito@rcf.rhic.bnl.gov]
> >Sent: Wed 7/27/2005 4:29 PM
> >To: Bekele, Selemon
> >Subject: Re: [Brahms-dev-l] Making gtr files
> >
> >Hello.  You must logon to the gateway machine as you.  Then, you need to
> >log on to rcas as bramreco.
> >
> >
> >Hiro
> >
> >
> >Bekele, Selemon wrote:
> >
> >
> >
> >>Hi Hiro,
> >>
> >>     It seems that I need to log onto the gatway machines as user
"bramreco" and ssh to one of the rcas machines. Doing so I could not run the
script
> >>
> >>             updateScripts.sh
> >>
> >>which means I cannot get the ruby script
> >>
> >>             masterGlobalTracking.rb
> >>
> >>to run. Also I cannot get X11 connection when I log in as "bramreco"
which is not the case if I log in using my user name. May be only specific
persons are allowd to edit the scripts. Doing xhost + and setting the
display environment does not seem to work. Any idea what I need to do?
> >>
> >>Thanks,
> >>
> >>Selemon,
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
>
>
> _______________________________________________
> Brahms-dev-l mailing list
> Brahms-dev-l@lists.bnl.gov
> http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
>


_______________________________________________
Brahms-dev-l mailing list
Brahms-dev-l@lists.bnl.gov
http://lists.bnl.gov/mailman/listinfo/brahms-dev-l