Re: [Brahms-dev-l] global tracking

Ok
at least 12338 is there - see /home/bramsink/raw/2005/01/16

flemming
----------------------------------------------------------------
Flemming Videbaek
Physics Department
Brookhaven National Laboratory

e-mail: videbaek@bnl.gov
phone: 631-344-4106
----- Original Message ----- 
From: "Selemon Bekele" <bekele@pacific.mps.ohio-state.edu>
To: "flemming videbaek" <videbaek@bnl.gov>
Cc: "devlist" <brahms-dev-l@lists.bnl.gov>
Sent: Friday, July 01, 2005 6:51 PM
Subject: Re: [Brahms-dev-l] global tracking


>
> Hi Flemming,
>
> I found the following Time calibration runs from the E-Log
> 12338, 12368,14130 . I tried to look in /home/bramsink/raw on HPSS but
> could not find these runs. Any ideas on where they might be?
>
> Thanks,
>
> *****************************************************
>
>  Selemon Bekele
>
>  4069 E Livingston Ave. |   Ohio State University
>  Apt# 217               |   174 W. 18th Avenue
>  Columbus, OH 43227     |   Columbus, OH 43210
>
>  e-mail: bekele@pacific.mps.ohio-state.edu
>
>  Tel. (614)439-9965 --- home, after 9 pm and weekends
>       (614)292-5321 --- office
>
> ******************************************************
>
> On Fri, 1 Jul 2005, flemming videbaek wrote:
>
> > Hi
> >
> > have you reviewed the old note#16 written by Djamel some years back.
This
> > describes the overall scheme of things and flow; there may have been a
few
> > changes yet.
> >
> > One thing is obvious though Tdcgain is picosec/channels and needs the
> > special time-calibrations runs, This was done a few times per
run-period.
> > They may well be commited already
> > I suggest you check the database entries.
> > The code will definetely NOT work with regular datafiles - it needs the
> > special raw data.
> >
> >
> >
> >
> > ----------------------------------------------------------------
> > Flemming Videbaek
> > Physics Department
> > Brookhaven National Laboratory
> >
> > e-mail: videbaek@bnl.gov
> > phone: 631-344-4106
> > ----- Original Message -----
> > From: "Selemon Bekele" <bekele@pacific.mps.ohio-state.edu>
> > To: "devlist" <brahms-dev-l@lists.bnl.gov>
> > Sent: Friday, July 01, 2005 1:22 PM
> > Subject: Re: [Brahms-dev-l] global tracking
> >
> >
> > >
> > > Hi all,
> > >
> > > hope you are doing fine. I am looking into the calibrations for
> > > H1 and H2. It seems that I need to run over gtr files. To get started,
I
> > > run the script "TofTdcGain.C" with one of the recent gtr files in
> > > /brahms/data21/data/run05/cucu/200/r12505/gtr/. However the process
> > > breaks with the error message:
> > >
> > > ########################
> > > In BrTofCalModule::Init()
> > > BrDetectorDbmanager: File to use DetectorParametersRun05cucu200.txt
> > > ******************************************************************
> > >  Adding BrDetectorParamsTof for TOFW
> > >  Adding BrDetectorParamsTof for TFP1
> > >  Adding BrDetectorParamsTof for TFP2
> > >  Adding BrDetectorParamsTof for TFP3
> > >  Adding BrDetectorParamsTof for TFP4
> > >  Adding BrDetectorParamsTof for TFP5
> > >  Adding BrDetectorParamsTof for TFP6
> > > Found TOFW
> > >   BrDetectorParamsTof
> > >   TOFW
> > >
> > >
> > >  Adding BrTofCalibration for TOFW
> > > In BrTofCalModule::Init()
> > >  Adding BrDetectorParamsTof for TOF1
> > > Found TOF1
> > >
> > >   BrDetectorParamsTof
> > >   TOF1
> > >
> > >
> > >  Adding BrTofCalibration for TOF1
> > > In BrTofCalModule::Init()
> > >  ---> FFS at 8 deg.  and BFS at 8 deg.
> > >  ---> FS lined up
> > >  Adding BrDetectorParamsTof for TOF2
> > > Found TOF2
> > >   BrDetectorParamsTof
> > >   TOF2
> > >
> > >
> > >  Adding BrTofCalibration for TOF2
> > > Stop asserted
> > >
> > > Error in <TLinearFitter::UpdateMatrix>: matrix can't be updated -
input
> > > points not stored
> > >
> > >  *** Break *** segmentation violation
> > >  Generating stack trace...
> > > /usr/bin/addr2line: bratmain: No such file or directory
> > > /usr/bin/addr2line: bratmain: No such file or directory
> > >  0x005d9d22 in BrTofTdcGainCalModule::Finish() at
> > >
> >
/brahms/u/tigist/MyBrahms/brat/modules/calib/tof/BrTofTdcGainCalModule.cxx:3
> > 34
> > > from /brahms/u/tigist/lib/libBratModuleCalib.so.2
> > > ...
> > > ######################
> > >
> > > Looking at line 334 in BrTofTdcGainCalModule.cxx, I find the line
> > >
> > > fCalibration->SetTopTdcGain(i,1/pol->GetParameter(1))
> > >
> > > It is not quite clear from this point on what and where the problem
is.
> > > It may be that I need to have some more information besides gtr files.
> > > It would be great and get me going faster if anyone who has done this
> > > before gives me some suggestions and a list of things to make ready
for
> > > the Hodoscope calibratios would be nice.
> > >
> > > Thanks,
> > >
> > > *****************************************************
> > >
> > >  Selemon Bekele
> > >
> > >  4069 E Livingston Ave. |   Ohio State University
> > >  Apt# 217               |   174 W. 18th Avenue
> > >  Columbus, OH 43227     |   Columbus, OH 43210
> > >
> > >  e-mail: bekele@pacific.mps.ohio-state.edu
> > >
> > >  Tel. (614)439-9965 --- home, after 9 pm and weekends
> > >       (614)292-5321 --- office
> > >
> > > ******************************************************
> > >
> > >
> > > _______________________________________________
> > > Brahms-dev-l mailing list
> > > Brahms-dev-l@lists.bnl.gov
> > > http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
> > >
> >
>
> _______________________________________________
> Brahms-dev-l mailing list
> Brahms-dev-l@lists.bnl.gov
> http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
>


_______________________________________________
Brahms-dev-l mailing list
Brahms-dev-l@lists.bnl.gov
http://lists.bnl.gov/mailman/listinfo/brahms-dev-l