Re: [Brahms-dev-l] DCs

From: flemming videbaek <videbaek@rcf.rhic.bnl.gov>
Date: Tue Jun 29 2004 - 07:27:08 EDT
Hi Truls,
cc/ pawel

Thanks for reminding us.
-This was a failure in the tdc so there was not a failure or in-effeciency
in the trigger.
-Since the bottom workedd fine and the time differenc between top and bottom
is small
  it would be easy for those runs just to use the bottom time.

flemming

----------------------------------------------------------------
Flemming Videbaek
Physics Department
Brookhaven National Laboratory

e-mail: videbaek@bnl.gov
phone: 631-344-4106
----- Original Message ----- 
From: "Truls Martin Larsen" <trulsml@nbi.dk>
To: "Brahms Devel List" <brahms-dev-l@lists.bnl.gov>
Sent: Tuesday, June 29, 2004 3:14 AM
Subject: Re: [Brahms-dev-l] DCs


> Hi,
>
> I have been looking in the elog for the 200GeV AuAu data, and I just want
> to point out a potential problem the may occur from run 10299 -> 10417.
> The top tdc7 of TRFS was only working periodically.
> >From what I managed to dig out, it did not work in the following periods:
>
> Died in 10299, working again in 10317
> Died in 10346, working again in 10377
>
> After an access it was fixed, and was working in run 10417.
>
> Regards
>     Truls
>
> On Mon, 28 Jun 2004, Pawel Staszel wrote:
>
> > Hi,
> > I committed DC calibration for runs 9813 to 9991.
> > Note, that the calibration has been done with TRFS time reference
> > enabled, because the found that
> > for some runs it improves the resolution a lot.
> > ONE HAS TO ADD:
> > if(runNo>=9813 && runNo<=9991)localdctrack->UseTrFsRef(kTRUE);
> > otherwise the quality of tracks will be very bad.
> > We decided to keep this option for all AuAu data in run04.
> > (it is also used for p+p).
> >
> > If we agree I can keep the local tracking scripts up to date according
> > to what is
> > in the db. Are the official scripts on  ~bramreco/run04/auau/200/ltr
> > and  ~bramreco/run04/auau/63/ltr ?
> >
> > I also updated TrackOffset.C and GlobalTracking.C on ~/run04/auau/63/gtr
> > (only), so the
> > T2_T3  matching params are supported in the same way as other
> > BrModuteMatchTrack related parameters
> > (FFS, T3_T4, T4_T5, T2_T4).
> >
> > Best Regards
> > Pawel.
> >
> >
> >
> > _______________________________________________
> > Brahms-dev-l mailing list
> > Brahms-dev-l@lists.bnl.gov
> > http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
> >
>
> -- 
> *-----------------------------*
> |http://folk.uio.no/truml    /
> |Truls Martin Larsen        /
> |trulsml@nbi.dk             .
> |The Niels Bohr Institute //
> |Work Address:           / \0
> |Blegdamsvej 17         /\_/
> |DK-2100 Copenhagen    /  /
> |Tel: +45 35325269    / -- 
> |                    /_/  |
> |Home address:      /     \
> |Overbys Alle 11   |      '
> |2500 Valby        |
> |Denmark           |
> |Mob: +47 99691838 |
> *------------------*
>
>
>
> _______________________________________________
> Brahms-dev-l mailing list
> Brahms-dev-l@lists.bnl.gov
> http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
>


_______________________________________________
Brahms-dev-l mailing list
Brahms-dev-l@lists.bnl.gov
http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
Received on Tue Jun 29 07:27:33 2004

This archive was generated by hypermail 2.1.8 : Tue Jun 29 2004 - 07:27:53 EDT