[Brahms-dev-l] Re: DC calibration

From: Pawel Staszel <ufstasze@if.uj.edu.pl>
Date: Mon Jun 21 2004 - 17:06:56 EDT
Dear Flemming,

>  
> On the mom matching - I found that d3-d4 did look good for the lower 
> fields, is this also true for the highest field
> settings? I was not so happy with that - but this was before your 
> final tunes.

I looked at the momentum correlation for two runs 11702 (1/2B) and 11702 
(1/1B).
The plots are available on my local sever:
http://zefir.if.uj.edu.pl/staszel/brahms/momcorr/index.html.
As I wrote, I see a nice matching between D3 and D4 momenta, however D2 
momenta are about 2% (on average)
larger D3(D4) momenta. Comparing D3 versus D4 for T3 and T2 used as a 
front tracker, one can conclude that
the momentum uncertainty due to the tracking in T2 is +-0.5%, and it is 
strongly correlated with momentum (x position in
the detector).
I guess that different offsets for 1/2 and 1/1 field for D2-D3(D4) 
correlation suggest than the un-matching in momentum
is NOT only due to the tracking (will check 1/4 field to confirm it).

Best Regards
Pawel.




_______________________________________________
Brahms-dev-l mailing list
Brahms-dev-l@lists.bnl.gov
http://lists.bnl.gov/mailman/listinfo/brahms-dev-l
Received on Mon Jun 21 15:27:29 2004

This archive was generated by hypermail 2.1.8 : Mon Jun 21 2004 - 15:27:51 EDT