C4 calibration tables

From: Flemming Videbaek (videbaek@rcf.rhic.bnl.gov)
Date: Thu Mar 20 2003 - 19:30:55 EST

  • Next message: Hironori Ito: "Re: C4 calibration tables" 
    ----- Original Message -----
From: "Stephen Sanders" <ssanders@ku.edu>
To: "Flemming Videbaek" <videbaek@sgs1.hirg.bnl.gov>
Sent: Thursday, March 20, 2003 7:09 PM
Subject: addition c4 db parameter

Just as one for other detector with FB ADC two parameters are needed
AdcGap an AdcGapStart. See e.g. Inel and BB counters, the main point being
the following algorithm

if (Adc > adcStart) Adc=-adcGap;

This has now been defined in the calibration tables, and you can thus
update\the C4 calibration class.

Flemming



| Hi Flemming,
| Could you add a parameter for the adc "gap" to the db for C4.  This was
| obviously not
| needed in C1.  The current parameters are called
|
| pedestal
| pedestalWidth
| adcGain
|
| so I would suggest using the name
|
| adcGap  .
|
| Thanks,
| Steve
|
-- 
Flemming Videbaek
Brookhaven National Laboratory
Physics Department
tlf 631-344-4106
fax 631-344-1334
e-mail: videbaek@bnl.gov

    This archive was generated by hypermail 2.1.5 : Thu Mar 20 2003 - 19:31:52 EST