Re: Magnet gaps in brag

From: Pawel Staszel (staszel@alf.nbi.dk)
Date: Tue Jun 11 2002 - 11:50:10 EDT

  • Next message: Djamel Ouerdane: "BFS geometry tuning"

    Hi Djamel and Flemming,
    The values for magnets Djamel got from brag agree with the values I used
    doing a fs geometry tuning. They were retrieved also from brag.
    What Djamel sees is a disagreement between D4(and only D4) x, y, and z position
    when
    comparing the brag and db values, so my suspicious is that there is something
    wrong
    with D4 in the db. Concerning the magnet gaps: D3 and D4 x gaps for db and
    brags don't match
    (as Djamel pointed).
    
    Pawel
    
    Flemming Videbaek wrote:
    
    > Hi Djamel,
    >
    > I strongly trust the magnets in Brag are correct unless someone else has
    > modified default settings
    > I have a meeting at 11-12.30 and can take a further look later.
    >
    > Flemming
    >
    > ------------------------------------------------------
    > Flemming Videbaek
    > Physics Department
    > Brookhaven National Laboratory
    >
    > tlf: 631-344-4106
    > fax 631-344-1334
    > e-mail: videbaek@bnl.gov
    > ----- Original Message -----
    > From: "Djamel Ouerdane" <ouerdane@nbi.dk>
    > To: "brahms-dev-l" <brahms-dev-l@bnl.gov>
    > Sent: Tuesday, June 11, 2002 9:55 AM
    > Subject: Magnet gaps in brag
    >
    > > Hi,
    > >
    > > I've just checked out brag (after the latest magnet gap update) and
    > > checked some positions in the BFS. The gap length along the X direction
    > > doesn't match for D3 and D4 :
    > >
    > >                D3        D4
    > >   SQL DB :     38        40
    > >   BRAG   :     40.005    44.625
    > >
    > > D5 looks fine.
    > >
    > > The positions of the DCs and magnets are all wrong ( from 1 cm to 4 cm
    > > offsets in X in some cases), (the angles too but it's an easy correction).
    > > I can spend a lot of time tuning the parameters "refdist" and
    > > "clearance"  for each of the detectors unless someone tells me how to
    > > related these quantities to the positions given in the geo output
    > > (global). That's urgent.
    > >
    > > Thanks.
    > >
    > > Djam
    > >
    > >
    > > --
    > > Djamel Ouerdane ------------------------------------------o
    > > |  Niels Bohr Institute      |  Home:                     |
    > > |  Blegdamsvej 17, DK-2100 Ø |  Jagtvej 141 2D,           |
    > > |  Fax: +45 35 32 50 16      |  DK-2200 Copenhagen N      |
    > > |  Tel: +45 35 32 52 69      |  +45 35 86 19 74           |
    > > |                 http://www.nbi.dk/~ouerdane            |
    > > |                  ouerdane@nbi.dk                        |
    > > o---------------------------------------------------------o
    > >
    
    --
     ----------------------------------------------------------------------
    | Pawel Staszel                                                        |
    | Niels Bohr Institute Tb 8    email:      staszel@nbi.dk              |
    | Blegdamsvej 17               phone:      (+45) 35 32 53 51           |
    | København Ø                    FAX:      (+45) 35 32 50 16           |
    | Danmark                                                              |
     ----------------------------------------------------------------------
    



    This archive was generated by hypermail 2b30 : Tue Jun 11 2002 - 11:51:42 EDT