brat/mult and gbrahms

From: Hironori Ito (hito@students.phsx.ukans.edu)
Date: Wed Jul 26 2000 - 18:29:43 EDT

  • Next message: Kris Hagel: "Monitor additions to BRAT" 

    	I have made the several change in brat/mult and gbrahms for
simulation.  The following is the change.

1.  In gbrahms, the numbering (volume number or sub volume number) for si
and tiles are changed.
2.  Now, a user can select the configuration of si and tiles by setting a
parameters.  The list of parameters are listed below.
	For silicon detector:
		si0par,si1par,si2par,si3par,si4par,si5par
	For preamp-shaper box:
		prea0par,prea1par,prea2par,prea3par,prea4par,prea5par
	For tile:
		tile0par,tile1par,tile2par,tile3par,tile4par,tile5par

	To set the parameters, look at the example in global/bd_mult.F

	The default geometry is set to reflect the current configuration
of tiles and si detectors.

3.  In brat/mult, the mapping of detectors in digitization routine was
changed.  Now, the gbrahms data and the raw data have the exactly same
mapping.

	Hiro

    This archive was generated by hypermail 2b29 : Wed Jul 26 2000 - 18:25:05 EDT