Re: BRAHVO does not start. ROOT problem?

From: Flemming Videbaek (videbaek@sgs1.hirg.bnl.gov)
Date: Tue May 16 2000 - 12:18:21 EDT

  • Next message: Christian Holm Christensen: "Re: BRAHVO does not start. ROOT problem?" 

    Problem fixed.
Following Kris recompilation and update of the defauklt root version to be
2.24.04
one has to recompile/relink. This was just done. Brahvo now start up
properly, but have now checked any actions.


On the other hand all compilation gives the following error that comes from
deep-side ROOT include files
Any clues (except for the obvious that they change a macro). Has this been
reported by root list?
I  did not see it when recompiling Brat with the new root libraries and
include files.


make[1]: Entering directory `/home/operator/oncs/brahvo/src'
g++ -DONLINE -DCONFIG_DIR=\"/home/operator/HV/config/\" -I/home/operator/onc
s/brahvo/include -I/home/brahmlib/root/root_v2.24.04/linux/include  -Wall -g
 -O2 -c -o  brahvo.o brahvo.cc
In file included from
/home/brahmlib/root/root_v2.24.04/linux/include/Bytes.h:40,
                 from
/home/brahmlib/root/root_v2.24.04/linux/include/TBuffer.h:22,
                 from
/home/brahmlib/root/root_v2.24.04/linux/include/TObject.h:200,
                 from
/home/brahmlib/root/root_v2.24.04/linux/include/TNamed.h:18,
                 from
/home/brahmlib/root/root_v2.24.04/linux/include/TDirectory.h:17,
                 from
/home/brahmlib/root/root_v2.24.04/linux/include/TROOT.h:21,
                 from /home/operator/oncs/brahvo/include/BrahvoInc.hh:34,
                 from brahvo.cc:14:

/fv

----- Original Message -----
From: Konstantin Olchanski <olchansk@ux1.phy.bnl.gov>
To: <brahms-dev-l@bnl.gov>
Sent: Tuesday, May 16, 2000 9:38 AM
Subject: BRAHVO does not start. ROOT problem?


>
> Folks, BRAHVO no longer runs on pii5. This is what I get:
>
>
> operator@pii5<10>:id -a
> uid=1021(operator) gid=31025(brahms) groups=31025(brahms)
> operator@pii5<11>:pwd
> /home/operator/HV/brahvo/bin
> operator@pii5<12>:
> operator@pii5<13>:brahvo
>
> !!!!!!!!!!!!!!   W A R N I N G    !!!!!!!!!!!!!
>
> The internal data structures have been changed.
> Please recompile the setup file which contains
> the definition "G__cpp_setupX11_G__X11()"
> using CINT version 5.14.25, Nov 25 1999.
> library=51428 cintbody=51415
>
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
> operator@pii5<14>:
>
>
> --
> Konstantin Olchanski
> Physics Department, Brookhaven National Laboratory, Long Island, New York
> olchansk@bnl.gov
>

    This archive was generated by hypermail 2b29 : Tue May 16 2000 - 11:09:42 EDT