Photos by BNL photographer

• Lots of humans next to FS.
• View of BRAHMS from crane access.
• BRAHMS seen from Blue cryo pipes.
• Another picture from Blue cryo pipes.
• FS with T2 out.

Photos Taken 25 January 2002

• 942.
• 943.
• 944.

Photos Taken 20 December 2001

• MRS Trigger Counter for pp (front of TPM1).
• MRS Trigger Counter for pp (back of TOFW).
• MRS Trigger Counter for pp (back of TOFW: side view).
• MRS Trigger Counter for pp (back of TOFW: wide view).

Photos Taken 9 August 2001

• Back View of TOFW.
• Front View of TOFW.
• TPM2 and TOFW.
• Calibration Fibers on TPM2.
• Tile, Silicon, Beam Pipe.
• Centrality Detectors seen from MRS.
• Another Back view of TOFW.

Photos Taken 27 March 2001

• 881.
• 882.
• 883.
• 884.
• 885.

Photos Taken 27 Nov 2000

• Apron with new layer of asphalt.(867).
• Interaction region with beam pipe protection(868).
• Close-up of beam pipe protection tube.(869).
• New racks for DC multiplexing units on BFS(870).
• New platform support for rack near H2.(871).
• 872.
• 873.
• 874.

Photos Taken 10 Jul 2000

• 823.
• 824.
• 825.
• 826.
• 827.
• 828.
• 829.
• 830.
• 831.
• 832.
• 833.
• 834.
• 835.
• 836.
• 837.
• 838.
• 839.
• 840.

Photos Taken 24 Apr 2000

• 802.
• 803.
• 804.
• 805.
• 806.
• 807.
• 808.
• 809.
• 810.
• 811.

Photos Taken 4 Apr 2000

• 790.
• 791.
• 792.
• 793.
• 794.
• 795.
• 796.
• 797.
• 798.
• 799.
• 800.
• 801.

Photos Taken 17 Mar 2000

• Assembly of the 4 drift Velocity Monitors(782).
• Detail on one of the drift velosty mnitors(783).
• RICH on the platform(784).
• RICH with all its signal connections(785).
• The complete Forward Spectrometer(786).
• Both BRAHMS Spectrometers, the DX magnet and the beam line(787).
• Another view of the Forward Spectrometer(788).
• BRAHMS at 2 o'clock(789)

Photos Taken 13 Mar 2000

• 773.
• 774.
• 775.
• 776.
• 777.
• 778.
• 779.
• 780.
• 781.

  ---

  Photos Taken 10 Mar 2000

  • RICH PMT under assembly(759).
  • Backend of FS(760).
  • FS angle marking on rail(761).
  • Beam Pipe and FS Spectrometer(762).
  • T3, D4 on platform(763).
  • Forward spectrometer seen from RHIC tunnel(764).
  • Detector surrounding D4(765).
  • T4 between D3 & D4(766).
  • Forward Spectrometer from MRS(767).
  • T3 Closeup (C1 to left)(769).
  • T2, H1, C1 and T3(770).

  ---

  Photos Taken 3 Feb 2000

  • Beam Group in Action(741).
  • TOF Module in Detector Lab(742).
  • TOFW: Back View(743).
  • TOF Module (top)(744).
  • TOF Module Bottom View(745).
  • RICH PMT Base and Amplifiers(746).

  ---

  Photos Taken 2 Feb 2000

  • MRS TOFW Panels(738).
  • MRS TOF Tubes(739).
  • TOFW MRS TOF Assembly(740).

  ---

  Photos Taken 24 Jan 2000

  • (733).
  • (734).
  • (735).
  • (736).
  • (737).

  Photos Taken 19 Jan 2000

  • RICH PMT's base with amplifier cards(729).
  • Another view of RICH PMT's base(730).

  ---

  Photos Taken 12 Jan 2000

  • MTCP1 at 34 deg. setting with Be Beam Pipe(723).
  • MRS TOF Cable Installation(724).
  • Index Installation for Remote Readout of F.S.(725).
  • FS Support Electronics for Trracking(726).
  • MRS Support Electronics for Tracking(727).
  • Be Beam Pipe in Place(728).

  ---

  ---

  Photos Taken 07 Jan 2000

  • SMA connectors for Si Patch Panel(720).
  • Inside of Si Patch Panel(721).
  • Hiro Ito with full Si Multiplicity Patch Panel(722).

  ---

  Photos Taken 23 Dec 1999

  • Civil Work for New Substation(706).
  • Magnet Hookup(707).
  • Be Beampipe in Place(708).
  • Beampipe Bakeout(709).
  • TOFW Module(710).
  • RICH and Drift Chamber in IR(711).
  • BFS Cable Trays(712).

  ---

  Photos Taken 21 Dec 1999

  • Beam Pipe(699).
  • Be Beam Pipe(700).
  • Rich Counter(701).
  • Back Forward Platform(702).
  • Water Connections to D4(703).
  • D4(704).
  • Electonics for Back Platform(705).

  ---

  Photos Taken 10 Dec1999

  • Collaboration Photo 10Dec1999

  ---

  Photos Taken 27 Oct 1999

  • Leak check of RICH (from front)(690).
  • Leak check of RICH (from back)(691).

  ---

  Photos Taken 24 Sep 1999

  • Assembled 20-slat TOFW module(670).
  • TOFW stand on MRS platform (sideview)(671).
  • TOFW stand on MRS platform (view from back)(672).
  • TOFW stand on MRS Platform (sideway)(673).
  • Back Forward Platform (track and drive system)(674).
  • Back Forward Platform (from RICH position(675).
  • Back Forward Platform Position for T5,H2, RICH(676).
  • Back Forward Platform-D3 and Fastbus rack support(677).
  • Front Back Platform drive system and electric insulation?(678)
  • FE Hut-TPC power supply control unit(679).
  • FE Hut-trigger NIM and VME crates(680).
  • FE Hut- Beam Beam Counter trigger electronics(681).
  • Sideview of D2 and shield(682).
  • Shield for T2, H2 along D2(683).
  • Back Front Platform at most forward position(684).
  • D1 and Shield (from MRS)(685).
  • Back Forward Platform in most forward position (view from back)(686).

  ---

  Photos Taken 11 Aug 1999

  • (634)
  • (635)
  • (636)
  • (637)

  ---

  Photos Taken 18 June 1999

  • Mult Stand Installation(563).
  • C1 on Filling Tank Mount(564).
  • C1 Filling Tank and C1(565).
  • Filling Tank Endplate and Pump(566).
  • Another View of C1 in Filling Tank(567).
  • Mult Tiles Partly Installed(568).
  • H1 Installation(569).
  • H1 Installation(570).
  • H1 Installation(571).
  • (572).
  • MRS Platform with Racks and TPC's(573).
  • Central Platform and Tiles in place (574).
  • (575).
  • Beam View of Multiplicty Array(576).
  • Beam View of Multiplicity Forward Left Array(577).
  • MRS Centrol Region(578).
  • FS from the back(579).
  • Beam Beam from DX(580).
  • (581).
  • C1, H1 and T2(582).
  • T2 ?????(583).
  • Electronics and HV under FS platform(584).
  • Beam View from DX(585).
  • MRS Platform at 90 deg.(586).
  • MRS Platform at 90 deg with Detector(587).
  • FS and MRS From DX(588).
  • (589).
  • IR Overview(590).
  • FS From MRS(591).
  • Multiplicity Installed and Ready(592).
  • Multiplicity, Beam Beam and MTPC1(593).
  • Central Platform(594).
  • D1(595).
  • Multiplicity, Beam Pipe and MRS(596).
  • (597).
  • FS Detector(598).
  • T2, H1 and C1 Ready(599).
  • Along Side D2(600).
  • Along Side D1(601).
  • Floorview of Central Region(602).

  ---

  Photos Taken 6 June 1999

  • MTPC-2 in lab before installation(537).
  • Installation of Beam Beam Counter cables(540)
  • Beam Beam left partly in place.(544)
  • Beam Beam from left DX.(546)
  • Right Beam Beam from near collision point(547)
  • Left Beam Beam from near collision point(548)
  • Right Beam Beam from near collision point(549)
  • Front of D1 with shielding installed(550)
  • Topview of Front Forward Spectrometer(551)
  • MTP-1 installed with electronics, and readout cabling(552)
  • MTP-2 installed with electronics, and readout cabling(554)
  • MRS gascontrols on platform(556)
  • T2 and C1 installed on Front Forward Platform (cabling to be completed)(557)
  • Back magnets (D4) from future position of RICH detector(558)
  • C1 from back(559)
  • Beam Beam level0 trigger electronics in F.E.Hut(560)

  ---

  Photos Taken 24 May 1999

  • Mid Rapidity TPC Installed(530)
  • C1 on Stand Behind Magnet D2(531)
  • D3 and D4 Mechanical Installation Complete(532)
  • Pivot Area(533)

  ---

  Photos Taken 19 May 1999

  • (524)
  • (525)
  • (526)
  • (527)
  • (528)
  • (529)

  ---

  Photos Taken 17 May 1999

  • Work on Pivot Platform(517)
  • C. Pearson Surveys Work(518)
  • Beam Beam Array and D1(519)
  • D3 and D4 Installation on PLatform(520)
  • Brahms(521)

  ---

  Photos Taken 13 May 1999

  • MRS and FFS with Beam Pipe and Beam Array (501)
  • Yury Blyakhman working on Beam Beam Installation (502)
  • Home of the COSM (503)
  • Installation Progress (504)
  • FEH Electronics Installation (505)
  • Support Electronics for H1 and C1 Installed (507)

  ---

  Photos Taken 27 April 1999

  • Beam Counter Mount (464)
  • B.Budick working with Beam Beam Counter mouting(465)
  • The first set of small tubes installed in Left array.(466)
  • Back Platform with Jack mounts for D3,D4(467)
  • Support Platform for Beam Beam counters, multiplicity stand at Pivot(469)
  • Support Platform for Beam Beam counters, multiplicity stand at Pivot. Close up from MRS side.(470
  • Counting House on this sunny day.(471)

  ---

  Data Taken 8 April 1999

  • Padmonitor Display of a Cosmic Ray event in MTP1

  ---

  Photos Taken 6 April 1999

  • Unpacking of PMT for Tiles(451)
  • IR with back platform supports and gas lines instalaltion under way.(452)
  • D2 seen from end of Front forward Platform(453)
  • Magnets steel of coil disassembled and moved to IR ready for installation(454)
  • Back platform beening ready for painting on opposite side of beam line.(455)
  • Gas Panels initial installtion in 1002B (456)

  ---

  Photos Taken 31 March 1999

  • 414
  • 415
  • 416
  • 417
  • 418
  • 419
  • 420
  • 421
  • F.E.Hut racks and Nim Bins (422)
  • F.E.Hit Rack Instalklation (423)

  ---

  ---

  Photos Taken 25 February 1999

  • Mid Rapidity and Front Forward Spectrometer
  • Mid Rapidity and Front Forward Spectrometer

  ---

  Photos Taken 5 February 1999

  • 1/4 of RICH PMT array
  • 334
  • Some of the wrapped and assembled tiles (335)
  • 336
  • Back track installed and ready for grouting (338)

  ---

  Photos Taken 1 February 1999

  • C1- all 32 Cells with green LEDs

  ---

  Photos Taken 27 January 1999

  • C1- top 16 Cells
  • Closeup of C1

  ---

  Photos Taken 5 January 1999

  • D1 and D2 on Platforms
  • Trays for Utilities and Signals to Platforms
  • D2 on Platform
  • Front-Forward and Mid Rapidity Spectrometers
  • Checking Back-Forward Drive Plate
  • Completed Back-Forward Track
  • Machining Back-Forward Platform Track
  • R. Debbe and E. Baker working on C1
  • Closeup of C1 PMT Plate
  • Mid Rapidity TOF Scintillator
  • D1 being prepared for mapping
  • D3 Magnet Under Construction
  • D4 Coil
  • D4 Magnet at Shop
  • MTPC with Readout and Cosmic Ray Setup
  • TOF Slats Tested for Mid Rapidity

  ---

  Photos Taken 4 January 1999

  • D2 on Platform

  ---

  Photos Taken 23 December 1998

  • Flexible Utility Feeds for Platforms
  • Magnet Water System

  ---

  Photos Taken 10 December 1998

  • Ringing the Phobos Magnet Coils
  • Machining C1

  ---

  Photos Taken 1 December 1998

  • Machining Parts for Beam Pipe Stand
  • Working on Counting House Stairs

  ---

  Photos Taken 30 November 1998

  • Water Cooling Tower
  • Alcove for Back Spectrometer
  • D1 Ready for Magnetic Field Measurements
  • Field Clamps for D3 and D4

  ---

  Photos Taken 4 November 1998

  • Water cooling pipes installation
  • Water cooling pipes installation
  • View of IR from the tunnel.
  • Dave Philips
  • Yousef Makdisi
  • D. Philips and RHIC Personnel

  ---

  Photos Taken 3 November 1998

  • Front Forward Platform
  • 158
  • Water Cooling System
  • Cooling Tower footings
  • Shielding Wheatherproofed
  • Cable Trays to Counting House
  • FEH Clean Power Connects
  • D1 Buss Work
  • 165

  ---

  Photos Taken 29 October 1998

  • Weatherproofing the Shielding
  • D5 with Water Cooled Cable
  • Mid-Rapidity and Front Forward Platform
  • Cooling Pumps andd Heat Exchanger in place
  • Assembly of D3
  • D1 Buss Work
  • D3 and D4 Iron Parts

  ---

  Photos Taken 20 October 1998

  • Installation of Water System
  • Main AC Disconnects
  • Clean Power Installation in FEH
  • Work on Front Forward Platform
  • Rigging D3 Iron
  • Moving D3 Iron to Assembly Area
  • D2 Test Installed on Platform
  • D2 on Platform in Bldg. 922

  ---

  Photos Taken 15 October 1998

  • D5 Mounted on Platform
  • 2:00 IR
  • D0 to DX Transition
  • Installation of Cooling Towers Piers
  • D1 Buss Work
  • Assembly of Front Forward Platform
  • Jack Plate Work for Front Forward Platform

  ---

  Photos Taken 9 October 1998

  • Milling of C1 in Central Shops
  • Completed C1 Phototube Mount
  • Closeup of C1 Phototube Mount
  • Assembly of Front Forward Platform
  • Work on D1 Coil Buss
  • D1 Buss Work
  • Front Platform Parts

  ---

  Photos Taken 15 October 1998

  • D5 Mounted on Platform
  • 2:00 IR
  • D0 to DX Transition
  • Installation of Cooling Towers Piers
  • D1 Buss Work
  • Assembly of Front Forward Platform
  • Jack Plate Work for Front Forward Platform

  ---

  Photos Taken 9 October 1998

  • Milling of C1 in Central Shops
  • Completed C1 Phototube Mount
  • Closeup of C1 Phototube Mount
  • Assembly of Front Forward Platform
  • Work on D1 Coil Buss
  • D1 Buss Work
  • Front Platform Parts

  ---

  Photos Taken 28 September 1998

  • D. Phillips and W. McGahern with D1

  ---

  Photos Taken 25 September 1998

  • McGahern
  • View from the Counting House
  • View in Counting House
  • View in Counting House
  • Fast Electronics Hut
  • Magnet Inspection

  ---

  Photos Taken 23 September 1998

  • Brahms Counting House
  • Track Installation by Survey Crew
  • Brahms Power Supplies
  • Brahms Magnet Monitor System
  • Brahms Counting House
  • D1 Magnet Bus Work

  ---

  Photos Taken 10 September 1998

  • Fabrication of Front Forward Platform.
  • Fabrication of D1 Bus
  • DX Installation in 2:00 IR
  • Machining of Front Forward Track Plate

  ---

  Photos Taken 25 August 1998

  • Fabrication of Front Forward Platform.
  • Fast Electronic Hut in Place
  • Fabrication of C1 PMT Plate
  • Machining of C1 PMT Plate

  ---

  Photos Taken 11 August 1998

  • Pouring Cement Footings at Counting House
  • Digging FEH footings

  ---

  Photos Taken 10 August 1998

  • Digging Counting House Footings
  • Pulling Magnet Cables

  ---

  Photos Taken 03 August 1998

  • Installing Magnet Utility Cables

  ---

  Photos Taken 29 July 1998

  • D3 Coil
  • B. Scheetz with Receiver Board

  ---

  Photos Taken 27 July 1998

  • R. Debbe with Calibration Chamber
  • TOFW Prototype slats under test
  • Test Beam Electronics at AGS
  • Steel for Front Forward Spectrometer (FFS)
  • DX Installation at 2:00
  • 2:00 Shielding and Trays

  ---

  Photos Taken 22 July 1998

  • Brahms Fast Electronic Hut (FEH)

  Photos of TPC receiver board ready in for testing.

  • Receiver board mounted in VME crate
  • main Receiver board and one mezzanine board
  • Mezzanine card

  ---

  Photos Taken 30 June 1998

  • MTPC1 with FEE and cables
  • E866/BRAHMS Drift Chambers
  • D1 with coils installed
  • D1 field clamps
  • D1 with coils installed
  • D1 in Bldg 922
  • IR Utility Trays
  • 2:00 triplet being assembled
  • 2:00 triplet
  • TCP readout board

  ---

  Photos Taken 12 June 1998

  • D1 Coil Getting Outer Insulation
  • D1 Iron
  • D2 Ready for Final Prop.
  • D5 and Transformer in IR
  • Rigging Shielding at 2:00

  ---

  Photos Taken 28 May 1998

  • MRS Platform with Builders
  • MRS Platform with Builders
  • MRS Platform with Builders
  • MRS Platform with Builders(gif)
  • MRS Platform with Builders(gif)

  ---

  Photos Taken 14 May 1998

  • MRS Platform Installed
  • MRS Platform with Experimenters
  • Water System Componentys
  • D2 Being Mapped

  ---

  Photos Taken 07 May 1998

  • MRS track being surveyed
  • Utility Cable Tray in IR
  • MRS Platform Assembly
  • D5 Mapping Complete

  ---

  Photos Taken 28 April 1998

  • D1 Iron at AGS
  • MRS Platform Parts
  • MRS Track Being Installed
  • Triplet Under Construction

  ---

  Photos Taken 14 April 1998

  • DX Support
  • Spectrometer Pivot
  • AC Disconnect Panels
  • Magnet D2
  • Mid-Rapidity Platform Assembly
  • Machining of D1 Iron
  • Mid-Rapidity Track
  • Conference on D1 Machining

  ---

  Photos Taken 3 April 1998

  • D5 Magnet Measuring
  • Mid Rapdity Platform
  • Utility Trays in 1002A
  • DX Support
  • DX Support
  • Completed Utility Trays Outside
  • Machining of D1 Iron
  • Machining of D1 Iron

  ---